Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Garland
If your swing gate drags on the ground, your slide gate stalls mid-travel, or the opener stopped working entirely, we can fix it. Gate repair in Garland typically runs $175-$485 for hinge and post work, $250-$700 for opener and automation repairs, and $125-$225 for a service call and diagnostic. Most repairs on swing gates and openers are completed in one visit, and every price is agreed before we turn a single bolt. Call (936) 259-0479 and a real person answers, 24 hours a day.
Ironworks Gate Co. is a dedicated gate repair shop that works on every part of the system: the steel, the hinges, the motor, the keypad, the safety sensors. We have been doing this work for over 42 years, and our crews know Garland’s neighborhoods, its housing stock, and the specific ways its soil and weather work against a driveway gate.
Why Ironworks Gate Co. Is Garland’s Preferred Gate Repair Company
Garland homeowners tend to keep their homes for a long time, and they have learned the difference between a handyman who will “take a look” and a gate specialist who will fix the actual problem. We are the second call, the one made after the first guy didn’t get it right. Victor Salinas runs this company with a simple rule: the 400th job gets the same care as the first.
Our reputation in Garland rests on a few things that are not complicated. A live person answers every call, day or night. Technicians arrive background-checked and in uniform. We service nine major automation brands, so a LiftMaster, FAAC, BFT, or Linear opener gets diagnosed correctly the first time. Customers in Garland regularly tell us the same thing: the gate worked right, the bill matched the quote, and the truck showed up when we said it would.
We have built our name across Dallas-Fort Worth over 42 years, and our dispatch coordinates Garland jobs from our metro office daily. That means when a gate hangs up on a Friday afternoon in Garland’s North Garland neighborhood, we can usually get a crew there the same day. And every job carries the 90-Day Done Right Promise in writing. If it isn’t right, we come back and make it right. No arguing, no paperwork, no exceptions.
Key Takeaways
- Garland gate repairs typically range from $125 for diagnostics to $700 for full opener replacement work
- Hinge and post repair is the most common job we do in Garland, especially on older east-side subdivisions with clay soil
- Most repair jobs are completed in a single visit
- Every job carries a written 90-Day Done Right Promise
- Free estimates, and $50 off any repair over $250 for Garland customers
Our Gate Repair Services in Garland
Hinge & Post Repair
In Garland’s older subdivisions, particularly east-side neighborhoods off Belt Line Road and Broadway Boulevard, we see a lot of hinge posts that have gone out of true. The clay soil here expands and contracts throughout the year, which slowly works posts loose. Once the hinge post leans even a few degrees, the gate scrapes, the latch misses, and the operator strains. We reset posts in new concrete footings, replace worn hinges, and square everything back to the way it should be. A typical hinge and post repair for a residential swing gate in Garland runs $175-$485, depending on how far the post has moved and whether we need to cut and weld a new hinge plate.
Gate Realignment
Realignment is often the difference between a gate that fights itself and a gate that cycles smoothly for years. When a swing gate sags from post movement or a slide gate’s rack strip loosens, the gate binds. We re-hang gates, adjust the rack and pinion on slide systems, and re-test the full travel. In Garland, where we work on both the 1960s-era steel swing gates in Eastern Hills and the newer slide gates in Firewheel and Valley Creek, realignment jobs run $150-$400. Most are done in a single afternoon.
Electric Gate Repair
The electric side of a gate is where precision matters. We diagnose and repair motors, control boards, loop detectors, photocells, keypads, and remote receivers across nine major brands. A bad loop detector is a common culprit in Garland, particularly after heavy rain. A typical electric gate repair runs $250-$700. Our crews test every safety feature before they leave the driveway: entrapment protection, reversal force, obstruction response. On automatic gates, that is not optional work. It is the law and it’s our standard.
Automatic Gate Repair
Automatic gate repair in Garland often means restoring a system that worked for ten years and then stopped one morning. We service LiftMaster, FAAC, BFT, Linear, and more. Whether the problem is a worn capacitor, a faulty limit switch, or a control board damaged by a power surge from a Dallas-area storm line, we diagnose it on site and quote the fix before we start. Repairs run $250-$700, and we stock common control boards and safety edges for Garland jobs so a single visit is usually all it takes.
For more detail on our full scope of work, visit our Gate Repair hub page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Garland
We carry factory support and parts inventory for the brands most commonly installed in Garland driveways: LiftMaster, FAAC, BFT, and Linear, among others. A garage-door opener repair shop might take a guess at a gate opener problem. We don’t. Our technicians train on these systems specifically and we know the failure points of each one. If your FAAC hydraulic operator has a leak or your LiftMaster slide motor has lost its limit-setting memory, we have the part and the knowledge to correct it without replacing equipment that doesn’t need replacing.
Common Gate Repair Problems We See in Garland Homes
- Hinge posts leaning on clay soil. Garland’s older east-side subdivisions sit on expansive clay that shifts with moisture. Posts set shallow in the 1970s and 80s slowly work loose, causing swing gates to bind and scrape. The permanent fix is a deeper footing and fresh concrete, not just shimming the post.
- Slide gates jerking mid-travel. Rack and pinion strip fasteners loosen over time on slab-drive gates, especially those installed in the 1990s along major arterials like Jupiter Road and Miller Road. The gate stalls a few feet into travel, then jumps. Tightening the strip or replacing its mounting hardware resolves it.
- Loop detectors out of calibration. Garland’s wet spring months and heavy fall rain saturate the ground around driveway loops cut into concrete or asphalt. When ground moisture changes rapidly, older loop detectors lose their calibration and the gate won’t open for an exiting car. We re-tune or replace the detector and re-seal the loop.
- Safety photocells failing intermittently. Automatic gates in Garland must reverse when an obstruction breaks the safety beam. Photocell lenses cloud with dust or they shift slightly out of alignment after storms, and the gate refuses to close. Cleaning and realigning the cells usually solves it. A shorted cell needs replacing.
Pricing for Gate Repair in Garland, TX
| Repair Type | Typical Garland Price Range |
|---|---|
| Service call and diagnostic | $125-$225 |
| Hinge and post repair | $175-$485 |
| Gate realignment | $150-$400 |
| Electric opener repair | $250-$700 |
| Weld and rust repair | $150-$350 |
| Loop detector replacement | $200-$425 |
These are real numbers from Garland jobs we have done in 2024 and 2025. What changes a price is access, post depth, whether we need to cut concrete, and whether a control board or safety edge must be replaced. We quote everything before the job starts. You agree to the number you see, and that is the number on the invoice. We also offer $50 off any repair over $250, a free second opinion on any written estimate, and a permanent 5% discount for seniors and veterans. Call (936) 259-0479 for an exact quote; estimates are free.
We Also Serve Cities Near Garland
While this page is for Garland homeowners, our crews also cover nearby cities including Richardson, Mesquite, Addison, and Dallas. If your property sits along a Garland border road and you aren’t sure which service area applies, give us a call. We serve the broader Garland area and the surrounding metro daily. A quick phone call will sort out scheduling. Call (936) 259-0479 with your address and we will tell you exactly when we can be there.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Garland
The clay soil under Garland expands when it absorbs moisture, which pushes hinge posts out of alignment. Older gates set on shallow footings in east-side neighborhoods move enough to make the gate scrape the driveway. The permanent fix is resetting the hinge post in a deeper concrete footing with proper drainage, not just adjusting the gate height. That is the single most common repair we perform in Garland. Call (936) 259-0479 if your gate has started scraping after the rain; we can usually assess it the same afternoon.
Usually, yes. We service DoorKing service DoorKing among the nine brands we support, and many operator failures are repairable at the component level: a worn capacitor, a faulty limit switch, a control board fuse, or a relay. We stock common DoorKing parts for Garland jobs. Replacing the entire operator typically costs $1,200-$2,800, so repairing it for $250-$700 is almost always the better route. We quote the repair before we start and never push a replacement when a component fix will hold.
Most hinge and post repairs take between 4 and 6 hours on site, including removing the gate, breaking out the old footing, setting the new post, and re-hanging the gate. If the concrete needs a full cure before we re-hang the gate, we will brace the post and schedule a next-day return to finish. You will know the timeline before we begin.
A loop detector is a sensor wired to a wire loop embedded in the driveway that tells the gate opener when a vehicle is present. It is what lets your gate open automatically for an exiting car. In Garland’s clay-heavy, rain-prone soil, loop calibration drifts after wet months, and the gate fails to open for cars trying to leave. We re-tune or replace the detector, typically for $200-$425, and test it before we leave. If your gate only opens with the remote, the loop detector is the first thing to check.
Yes, every automatic gate repair includes full testing of entrapment protection: reversal force, safety edges, photocells, and obstruction response. It is part of our job and part of current safety standards. We test it after the repair and we document it. If a safety component is failed, we tell you and quote the replacement before any work is done. Call (936) 259-0479 to schedule a repair or a full safety inspection on your Garland driveway gate.
Call Ironworks Gate Co. for Gate Repair in Garland
When a gate stops working, it is usually on a morning when you are already late, and it is never convenient to wait a week for a repair. We answer the phone 24 hours a day, 7 days a week, and we schedule Garland calls quickly. Every job is quoted upfront, completed by a background-checked, uniformed technician, and covered by the 90-Day Done Right Promise in writing. Whether you live in Eastern Hills, Firewheel, Valley Creek, or anywhere else in Garland, call (936) 259-0479 for a free estimate. A live person answers every time.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving the Dallas-Fort Worth metro since 1984.