Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Garland
When a gate post shifts or a weld cracks in Garland, you need a repair that lasts, not one that looks fine for a season and fails again. That’s the difference we bring. Ironworks Gate Co. has been in the gate trade full-time since 1984, and our crews know Garland’s soil, weather, and the older welded gates that still guard its ranch-style homes. For fast answers and a free estimate, call us at (936) 259-0479. A live person answers the phone 24 hours a day, 7 days a week, and we’ll give you a straight price before any work starts.
Why Ironworks Gate Co. Is Garland’s Preferred Gate Parts & Welding Company
Garland is the kind of city where people stay put. Homes pass down, fences stay cedar, and gates get repaired instead of replaced. Our reputation in Garland was built the same way those gates were: one honest job at a time. Our background-checked, uniformed technicians work the way they would work in their own mother’s driveway, and our customers notice. We have completed thousands of gate jobs across Dallas County, and many Garland families have been calling us for years. A live person answers the phone at (936) 259-0479 whenever you call, day or night. If a gate stops working in Garland, you don’t wait until Monday morning to reach someone.
We serve all of Garland, from Firewheel and the neighborhoods around Naaman Forest High School, through Creek Bend and O’Henry, down to Duck Creek and toward the Mesquite line. Being local matters when the soil under your fence line is doing more work than the hardware bolted to it. Our Garland customers know we come ready for clay soil, old steel, and gate openers that have weathered a few north Texas thunderstorms. And we arrive with a simple promise: a written 90-Day Done Right Promise on every job. If it’s not right, we come back and make it right. No paperwork, no arguing.
Our Gate Parts & Welding Services in Garland
Our Gate Parts & Welding team handles the full range of metal repairs and replacement hardware for residential gates across Garland. From a cracked rail on a slide gate to a full custom fabrication, the work is quoted and agreed before the first bolt turns. Here’s what we cover most often in Garland.
Hinge Replacement
A gate that drags on the latch side usually isn’t a latch problem. It’s a hinge problem. In Garland, the clay-heavy soil under your fence line expands and contracts through the year, slowly moving the hinge post out of plumb. We replace worn barrel hinges, cut off rusted weld-on hinges, and get the leaf swinging true again. Most hinge replacements in Garland run $180 to $420, including parts and on-site labor.
Post Replacement
This is the job that separates a lasting repair from a six-month Band-Aid. Garland’s soil shifts, and shallow footings crack under the pressure. When a gate post leans enough to throw the gate off square, the post itself has to come out. We cut it free, dig a deeper footing, set the new post in concrete with rebar, and weld or bolt the hinges back on. A proper post replacement in Garland typically runs $350 to $850, depending on the depth needed and whether we’re reusing the existing gate leaf.
Rail Repair
Slide gates in Garland take a beating from both weather and the weight of the panel. The bottom rail collects moisture and rust, and stress cracks can appear at the weld joints. We can cut out a damaged section of rail and weld in a new piece, or replace the full rail if the corrosion has gone too far. Rail repair in Garland usually falls between $190 and $520 for weld patching, and $300 to $700 for a full rail replacement.
Custom Welding
Some gates aren’t worth replacing. They were built right in the first place. We do custom welding on site in Garland: re-welding broken pickets, reinforcing stressed corners, adding new hinge plates, and fabricating gate extensions or matching panels for older steel gates. Custom weld work is quoted by the job, but most Garland homeowners pay between $150 and $650, with a clear written price before any metal gets hot. The 90-Day Done Right Promise covers every weld we make, whether it’s a one-inch crack repair or a full post-and-panel rebuild.
Gate Rollers, Latch & Lock
Slide gate rollers wear out with use, and a gate that’s hard to push or noisy on the track usually needs new rollers, not a new gate. We keep common roller sizes and latch hardware stocked for quick turnaround in Garland. Latch and lock replacement runs $120 to $280, including the hardware and the labor to align it correctly. If the gate won’t stay latched or the lock cylinder has seized, call (936) 259-0479 and we’ll sort it out.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Garland
We’re trained and equipped on nine gate-automation brands, including LiftMaster, FAAC, BFT, and Linear. That means when a Garland gate opener fails, the correct fix is made on the first visit, whatever is on the driveway. We carry common parts for these brands in our service vehicles, so a limit switch or control board doesn’t turn into a multi-week wait. Whether it’s an old FAAC swing arm that’s lost its smoothness or a BFT slide operator that trips after every thunderstorm, we know the board, the wiring, and the fix.
Common Gate Parts & Welding Problems We See in Garland Homes
After 42 years of gate work, we can walk up to a Garland gate and usually tell you in two minutes what went wrong. Here are the failures we see most often in this city.
- Hinge posts leaned by clay soil. Garland’s Dallas County soil expands when wet and contracts when dry, and that cycle quietly shifts shallow footings. A post that was plumb last spring may be leaning by October, and the gate starts sagging on the latch side.
- Thunderstorm damage to openers. Garland sees frequent electrical storms, and a power surge doesn’t have to be a direct hit to fry a limit switch or a loop detector board. Non-weatherproofed openers fail first, but even well-sealed units can lose a board to a nearby strike.
- Stress cracks at rail-to-picket joints. The 1970s and ’80s ranch homes all over Garland often have original welded-steel gates, and those gates have now seen 40 or 50 Texas summers. Hairline cracks at the weld points widen over time, and if they’re not welded up before the panel splits, you’re looking at a new gate instead of a $200 weld repair.
- Rollers that bind on the track. Slide gates on Garland lots with clay soil settle unevenly, and even a half-inch of track unevenness will shred a roller set within a season. We replace the rollers and re-level the track so the gate rolls smooth instead of dragging.
Pricing for Gate Parts & Welding in Garland, TX
Every quote you get from us is a firm number agreed before work begins. Here are the typical ranges for Garland, based on what we see on the ground.
| Service | Typical Range in Garland |
|---|---|
| Hinge replacement | $180 - $420 |
| Post replacement (with new footing) | $350 - $850 |
| Rail repair (weld patch) | $190 - $520 |
| Rail replacement (full) | $300 - $700 |
| Custom welding (per job) | $150 - $650 |
| Gate rollers, latch & lock | $120 - $280 |
Two things drive the final number in Garland. First, how deep and solid the existing footing is. Second, whether the gate leaf itself is still worth keeping. We’d rather repair a good old gate than sell you a new one. Call (936) 259-0479 and we’ll give you a free estimate on the phone or in person, and the number we quote is the number on the invoice.
We Also Serve Cities Near Garland
Based from our Dallas-Fort Worth office, our crews cover Garland and the surrounding communities, including Richardson, Mesquite, Addison, and Dallas. If you’re nearby and need gate work done right, call (936) 259-0479. There’s a live answer waiting on the other end.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Garland
Because the hinge post is moving in the soil, not the hinge itself. Garland’s clay-heavy ground expands and contracts through the year, and if the post footing was poured shallow, the whole post shifts and the gate sags a few weeks after you tighten the hinge bolts. The fix that lasts is a deeper footing and a re-set post, not another cranking session on the hinge. Call (936) 259-0479 for an accurate assessment, and our quote is free.
For a standard residential gate in Garland, we set steel posts at least 36 inches deep, with rebar and a concrete footing that extends below the clay’s seasonal movement zone. On heavier gates or slide gates, we go deeper. Many failed posts we pull out in Garland were set at 24 inches or less, which works fine in sandy soil but not here. Our post replacements are built for this soil, and the work is covered by our 90-Day Done Right Promise.
If the crack is at a single weld joint and the rail steel is still solid around it, we can weld it clean on site in Garland for $190 to $520. If the rail is rusted thin from the inside or the crack runs lengthwise along the roller path, a weld will fail again because there’s no sound metal left to hold it. In that case a new rail section is the honest fix, typically $300 to $700. We’ll show you the rail and tell you straight which one you’re looking at before we touch it.
Longer, if it’s welded and finished correctly. Factory gates are built to a price point, and the weld quality and steel gauge can be thinner than what we’d use on a custom build. In Garland’s heat, rain, and humidity swings, a properly fabricated and primed steel gate will outlast most powder-coated imports. The key is the prep and the paint, not just the weld. We can build you a gate that matches your existing fence line and won’t need another call next year.
Very common. Garland gets frequent electrical storms, and a surge doesn’t need a direct hit to cook a limit switch or a control board. We see it every season. The fix is usually swapping the damaged board or switch, and we carry those parts for LiftMaster, FAAC, BFT, Linear, and the other major opener brands in our trucks. Call (936) 259-0479 and a live person will set you up with a Garland visit, usually within the same day for emergency repairs.
Contact Ironworks Gate Co. for Gate Parts & Welding in Garland
The post, the weld, the roller, the latch. When one part fails, the whole gate suffers. We’ve been fixing gates for over 42 years, and we’ve seen the damage Garland’s soil and storms can do. If your gate is sagging, sticking, or stopped entirely, call us at (936) 259-0479 for a free estimate. We’ll give you a straight answer, a firm price, and a written guarantee. Your gate will close like the day it was hung.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Garland and the surrounding cities since 1984.