Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Addison
If your gate won’t open, sags on its hinges, or the motor grinds without moving the leaf, you need a repair crew that knows Addison properties, not a handyman who will guess at it. Most gate repairs in Addison run between $180 and $650, depending on whether it’s a hinge rebuild, a realignment, or an operator replacement, and we quote that price before any work begins. Ironworks Gate Co. has served residential streets and estate driveways across Addison for over 42 years, and a live person answers when you call (936) 259-0479.
Key Takeaways
- Gate repair in Addison typically runs $180-$650, with hinge and post rebuilds on thehigher end when the footing has failed.
- Addison’s expansive clay soil is the single biggest reason swing gates go out of alignment, especially after a wet spring.
- East of the Dallas North Tollway, a new gate operator usually needs a separate electrical permit and UL 325 photo-eye verification.
- We service DoorKing, Linear, Viking, and Ghost Controls operators, among nine total brands, with parts on the truck for most Addison jobs.
- Every repair is backed by a written 90-Day Done Right Promise. If it’s not right, we come back and make it right.
Why Ironworks Gate Co. Is Addison’s Preferred Gate Repair Company
We work in Addison the way we would work in our own mothers’ driveways. Uniformed, background-checked technicians, an upfront price settled before a single bolt is turned, and a written guarantee on every job. That is the whole arrangement. No surprise invoice, no callback runaround, no gate that works for three weeks and fails again on a Sunday morning.
Addison homeowners call us because we are a Gate Repair specialist with certified training on nine automation brands, which means we diagnose the actual problem rather than swapping parts until something works. Homeowners also call because they have been burned before by a generalist who fixed the symptom and left the cause. A sagging gate off Belt Line Road is rarely just a hinge. It’s usually a post footing that was poured too shallow for the clay soil. We fix the cause.
When you call for service in Addison, you talk to a person, not a voicemail tree. That person can dispatch a technician to your neighborhood, from Addison Circle to the streets around Vitruvian Park and west of Midway Road, with the correct parts on board. Most repair jobs are completed in a single visit.
One more thing worth saying plainly: we have been doing this since 1984, and we plan to be answering the phone in Dallas-Fort Worth for another forty years. Addison is part of our home territory, and we work like it.
Our Gate Repair Services in Addison
Electric Gate Repair
When an electric gate in Addison stops responding to a remote, a keypad, or a vehicle loop, the failure is usually in one of three places: the operator board, the safety photocells, or the power supply. We carry boards and replacement parts for DoorKing, Linear, Viking, and Ghost Controls operators, along with five other major brands, so we can usually repair the gate on the first visit. A note for homes near Addison Airport: radio frequency interference from airport equipment can make a loop detector misread, and that is a fix we have done more than once in the neighborhoods east of Marsh Lane.
Automatic Gate Repair
An automatic gate in Addison has to pass a safety reversal test every time it closes. When we repair one, we run entrapment checks on the leading and trailing edges and verify photo-eye alignment before we leave the driveway. If your gate reverses for no reason, creeps after stopping, or the motor runs but the gate doesn’t move, call us. Most automatic gate repairs in Addison take under two hours on-site, and the fix is covered by the 90-Day Done Right Promise.
Hinge & Post Repair
This is the work that separates a real gate company from a parts-changing service. Addison sits on expansive clay that swells after rain and shrinks during dry spells, which moves your hinge post just enough to throw the gate off its strike plate. If the post footing is undersized, which we find often on older Addison homes, the post keeps moving no matter how many times you realign the leaf. We cut out the failed base, set a new steel post in a properly sized concrete footing, and rehang the gate so it swings true.
Gate Realignment
A gate that drags, binds, or won’t latch is usually a realignment issue, but realignment alone is a band-aid if the post footing has shifted. We check the post depth and soil condition before we adjust the hinges, because realigning a gate on a moving post wears out the hinge bearings in a season or two. For Addison homes with older iron gates, we often find the hinge post has settled half an inch or more since the home was built, and that half inch is enough to make the gate miss the latch entirely.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Addison
We are trained and certified on nine gate-automation brands, which means the technician who arrives at your Addison home knows the operator on your driveway. If you have a Viking operator that is running but not moving the gate, we diagnose the gear train rather than guessing at the board. If you have a Ghost Controls system that opens fine with the remote but ignores the keypad, we check the receiver frequency before touching anything else. We stock common repair parts for Linear and DoorKing operators on the truck, so most Addison repairs are finished in one visit. For every brand we service, the repair is covered by the written 90-Day Done Right Promise.
Common Gate Repair Problems We See in Addison Homes
- Swing gate post shift from clay soil. Addison’s expansive clay swells and contracts with the seasons. A hinge post set in a shallow footing will move enough after a wet spring that the latch misses the strike plate, and the fix is a new post set deeper, not just a hinge adjustment.
- Slide gate wheels jammed with decomposed granite and construction grit. Alleys near the Dallas North Tollway and recent Tollway projects collect fine grit that works into the wheel track and the rack and pinion. Left too long, it strips the gear on a BFT or Linear operator and turns a simple cleaning into an operator rebuild.
- Keypad and loop detector interference near Addison Airport. Radio equipment near the airport can create enough interference that a gate opens on a remote but not from a vehicle loop. The loop detector frequency often needs adjustment, and that is a diagnosis we make on-site, not from a phone call.
- Rusted hinge posts on older estate gates. Many Addison homes built in the 1980s and 1990s have ornamental iron gates with posts that were never galvanized. After decades of North Texas rain and sprinkler overspray, the post rusts through at the base, and the entire hinge assembly starts to sag. We weld in new steel, not patches.
Pricing for Gate Repair in Addison, TX
Here are real numbers for Addison, not a “call for quote” runaround. A basic hinge adjustment or latch repair runs $180 to $280. A full gate realignment with new hinge bearings runs $300 to $480. Replacing a hinge post with a new steel post and concrete footing runs $550 to $850, depending on how much concrete we need to remove. Electric gate repairs on the operator, board, or photocells run $220 to $600 for most brands, including DoorKing, Linear, Viking, and Ghost Controls. We quote every price before any work begins, and we don’t start until you approve the number. You also get a written 90-Day Done Right Promise on every completed repair. Call (936) 259-0479 for a free estimate, and ask about the $50 Off Any Repair Over $250 and the $89 Seasonal Tune-Up.
We Also Serve Cities Near Addison
Beyond Addison, our crews regularly work in Carrollton, Richardson, Irving, and Coppell. If you live just outside the Addison border and need a gate repaired, the same technicians, the same upfront pricing, and the same 90-Day Done Right Promise apply. Call (936) 259-0479 and we will get you on the schedule.
Serving Addison, TX - Our Local Coverage Area
We’re based in the Addison area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Addison
For a full-size swing gate in Addison, we set a new steel post in a concrete footing at least 36 inches deep. The expansive clay here shrinks and swells enough that an 18-inch footing, which we find on many original Addison installations, will move within a couple of seasons. If your post is shifting, call (936) 259-0479 and we will tell you whether a deeper footing is the real fix.
Yes, in most cases. A gate operator installation near the Tollway side of Addison typically requires a separate electrical permit, and the final inspection usually includes a UL 325-compliant photo-eye demonstration. West of Midway Road, the process is often simpler, with a basic electrical sign-off. We handle the paperwork and know which jurisdiction applies to your street.
Your slide gate is likely collecting decomposed granite and fine construction grit in the track and on the rack and pinion. Addison alleys near the Tollway and recently built commercial projects are especially prone to this. We clean the track, inspect the gear for wear, and adjust the operator so it stops binding. If the gear is already stripped, we replace it on-site.
In most cases, yes. We install and program operators that work with your existing Ghost Controls or FAAC keypad, so you don’t have to replace every entry device on the property. We check the radio frequency and wiring before recommending a new operator, and we quote the complete installed price before any work begins.
A proper safety inspection includes testing the entrapment reversal on both edges of the gate, verifying the photo-eye alignment, checking the loop detector response, and confirming the operator stops and reverses under pressure. We run each test three times before we leave. If anything fails, we correct it before we call the job done. Call (936) 259-0479 to schedule your inspection.
Call Ironworks Gate Co. for Gate Repair in Addison
If your gate is sagging, stuck, or dead, call (936) 259-0479. We answer the phone around the clock, we quote every price before the first bolt is turned, and we back every completed job with the written 90-Day Done Right Promise. No gate is too old, too heavy, or too far gone. If we can’t fix it honestly, we will tell you that too. You will not get an invoice bigger than the number we agreed on.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Addison, TX.