Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Parts & Welding for University Park Homeowners
When a gate sags, drags, or won’t latch, the problem is almost always in the parts: a worn hinge, a failed weld, a bent rail, or a roller that gave up years ago. For the Best Gate Parts & Welding in University Park, TX, hinge replacement, post resetting, and rail repair typically runs $165 to $650, and most jobs are completed in one visit. Ironworks Gate Co. has been doing this work for over 42 years, and we answer the phone live, 24 hours a day, at (936) 259-0479.
Victor Salinas leads our crew, and every technician who shows up at your University Park property is background-checked, uniformed, and paid to fix it right the first time, not to sell you something you don’t need. Homeowners in University Park know the difference between a patch job and a repair that lasts another twenty years. We build for the second one.
Key Takeaways:
- Most gate part replacements and welding repairs are completed in a single visit.
- Every job is backed by our written 90-Day Done Right Promise.
- We service Linear, Viking, Ghost Controls, and DoorKing hardware, along with other makes.
- Upfront pricing, agreed before any work begins. No surprises on the bill.
- Call (936) 259-0479 any hour for a free estimate.
What Our Gate Parts & Welding Service Includes
Gates fail slowly. The metal fatigues, the welds crack, the hinges wear out of round, and one morning the gate won’t close all the way and you can’t figure out why it started dragging. Here is exactly what we do on a gate parts and welding call in University Park, broken down by the work itself.
Hinge Replacement
Hinges carry the full weight of the gate, and in University Park’s clay-heavy soil, posts shift over decades and transfer that stress straight into the hinge barrels. When a gate starts to sag toward the latch side or scrapes the ground at the swing end, the hinges have usually worn past adjustment. We remove the old hinge, match or fabricate a replacement that fits the gate’s exact weight and swing pattern, and re-hang the gate so it closes square. Most hinge replacements are done in under two hours on site.
Post Replacement
A leaning post is not just a hinge problem; it means the foundation under that post has failed or the post itself has rusted through at ground level. We dig out the old footing, set a new post deeper and wider than the original, and weld or bolt the gate hardware back onto plumb steel. In University Park, where many homes were built in the 1940s through 1960s, original posts are often undersized by today’s standards. We upgrade them so the gate doesn’t lean again in five years.
Rail Repair
Gate rails bend when a vehicle taps the gate, when a wind gust catches it open, or when years of weight settle into the frame. A bent top or bottom rail puts the whole gate out of square, which wears the hinges and rollers unevenly and makes the motor work harder than it should. We straighten rails where the metal allows it, and weld in reinforcement where it doesn’t. The gate goes back to closing true, not just “close enough.”
Custom Welding
Some repairs can’t be done with a bolt-on part. A cracked frame member, a broken picket, a rusted-through bottom channel, or a decorative scroll that snapped off needs a welder who understands ornamental ironwork, not just structural steel. Victor Salinas and our crew weld in the field, grind the repair flush, and match the finish so the fix doesn’t advertise itself. If the original gate was hand-forged or custom built, we keep that character intact. No shortcuts, no ugly booger welds.
Gate Rollers
Sliding gates live and die by their rollers. When rollers wear flat, seize up, or come off the track, the gate grinds, jumps, and eventually refuses to move. We replace the roller assemblies, re-align the track, and adjust the guide wheels so the gate rolls without dragging. On cantilever gates, we also check the carriage bolts and frame alignment while we’re in there. In University Park’s summer heat, dry rollers wear out fast; we use sealed bearings that are built for Texas temperatures.
Latch & Lock
A latch that won’t catch is a security problem and a safety problem. We replace worn strike plates, realign latch bars, rebuild mechanical locks, and install or upgrade gate locks so the gate actually holds when it closes. If your gate also has an electric lock tied to an opener or keypad, we wire it in correctly and test it under load. A gate that looks closed but isn’t latched is worse than a gate that’s obviously broken, and we don’t leave a job until the latch engages every time.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Parts & Welding
We’ve serviced hundreds of Linear gate systems across the Dallas area, and their slide gate hardware shows up often in University Park’s larger estate properties. We keep Linear-compatible rollers, hinges, and latch hardware stocked on our trucks, and we know the frame dimensions their cantilever and v-track gates use. When a Linear gate drags or won’t seat, the fix is usually in the parts, not the motor, and we reach for the right part the first time.
We work on Viking and Ghost Controls hardware regularly, particularly on ornamental steel and tube-frame gates in Highland Park and University Park. Viking’s heavier swing gates put real stress on hinge posts and weld points, and Ghost Controls’ residential openers are often mounted on lighter gates that need reinforcement before the opener gets blamed for a failure. We also see DoorKing slide gates on commercial and multi-home entrances around Dallas, Richardson, and Addison. DoorKing gates run long hours and their rollers, track, and chain tension need regular attention. If you’re not sure what brand your gate hardware is, don’t worry about it. We’ll identify it on site and quote the repair before we touch a bolt.
Signs You Need Gate Parts & Welding Right Now
Most gate failures announce themselves weeks before they become full stops. If you see any of these five signs on your University Park gate, call us before the gate stops moving entirely.
- The gate is dragging on one side. This is almost always a hinge or roller problem, and every day it drags, the wear accelerates. A gate that scrapes today may not move at all next week.
- The gate sits crooked when closed. A visible lean or a gap at the latch side means the posts, hinges, or frame have shifted. Closing a crooked gate by forcing it just bends more metal.
- You hear grinding or squealing when the gate moves. That sound is metal on metal without lubrication or with worn-out rollers. By the time you hear it, the part is usually past saving.
- The latch won’t catch or the lock won’t turn. A gate that doesn’t latch isn’t a gate, it’s an open invitation. Even if it looks closed, a stiff latch will fail completely, usually at night or during weather.
- There’s rust, cracking, or a broken weld joint anywhere on the frame. Rust at the base of a post or along the bottom rail spreads silently, and a cracked weld can let go without warning. This is a structural repair, and it’s dangerous to ignore.
These are not cosmetic issues. A failing gate part puts stress on every other component, including the opener motor, and a broken weld can turn a 400-pound gate into a falling hazard. Welding repair carries real risk if done incorrectly, especially on load-bearing frame members and high-tension components. This is not a place for guesswork or a handyman with a buzzbox. It needs a trained welder who understands gate geometry and load. That’s what we do.
Our Gate Parts & Welding Process - Step by Step
We don’t surprise anyone. Here’s how a typical gate parts and welding job goes from your first call to the finished repair.
- 1
You call, a person answers. Call (936) 259-0479 any time, day or night. You’ll describe what the gate is doing, and we’ll ask a few pointed questions: how old the gate is, whether it’s swing or slide, what it sounds like, what it’s doing wrong. That’s enough for us to know what to bring.
- 2
We come out and inspect. A uniformed, background-checked technician arrives at your University Park home. We measure the gate, check the hinge play, examine the welds, roll the gate on its track, and look at the posts. We carry a magnetic particle inspection kit for welds and a dial indicator for hinge wear, so we know what’s failing, not just what’s loose.
- 3
You approve a written price before any work starts. We quote the repair, the parts, and the labor in writing, and you approve it before we turn a wrench. If the job reveals something else once we get into it, we stop and talk to you before doing anything more. No surprise charges.
- 4
We do the work on site. Most hinge, roller, latch, and weld repairs are completed in a single visit. We weld on site with mobile equipment, and we grind, clean, and finish every repair so it looks like it belongs. We don’t leave until the gate opens, closes, latches, and rolls the way it should.
- 5
We walk you through what we did, and we put the guarantee in writing. You’ll see the repaired part, the replaced hardware, and the bill matches the quote. Then you get our 90-Day Done Right Promise in writing. If it isn’t right, we come back and make it right. No paperwork, no arguing, no exceptions.
How Much Does Gate Parts & Welding Cost in University Park?
Gate parts and welding in University Park typically falls into these ranges, depending on the extent of the damage and the weight of the gate.
- Hinge replacement: $165 to $420 per hinge, including the part and installation. Heavy ornamental gates with custom-fabricated hinges run higher.
- Post replacement or resetting: $380 to $850 per post, including concrete footing, new post, and re-hanging the gate. Larger or decorative posts cost more.
- Rail repair: $140 to $390, depending on whether the rail can be straightened or needs a welded reinforcement section.
- Custom welding: $95 to $250 for most crack repairs, broken pickets, and frame reinforcement. Complex ornamental scroll work or full-frame repair is quoted on site.
- Gate roller replacement: $125 to $340 per gate, including roller assemblies, track alignment, and testing under load.
- Latch and lock replacement: $115 to $300, depending on the lock type and whether electric wiring is involved.
What moves the price is the gate’s weight, the amount of rust or previous “fixes” we have to undo, and whether the posts need concrete work. The easiest way to avoid overpaying is to fix the problem when it’s one part, not five. A hinge replaced today costs $165. A hinge allowed to fail for six months takes the post, the rail, and sometimes the opener with it. Every estimate from Ironworks Gate Co. is free and written, with the full price agreed before any work begins. You’ll never get a bill that doesn’t match the number you approved.
Gate Parts & Welding Near University Park - Our Service Area
We work across University Park and the surrounding Dallas communities every day of the week. Most of our calls take us into Farmers Branch, North Dallas, Highland Park, Lakewood, Addison, Richardson, Carrollton, Garland, Mesquite, and Coppell. If you need gate parts or welding and you’re within the Dallas metro, call us. We answer live, and we’ll tell you honestly how soon we can be there. The home page has more about the company and our full range of gate services.
Serving University Park, TX - Our Local Coverage Area
We’re based in the University Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Parts & Welding in University Park
Gate parts and welding covers the repair and replacement of the structural components that make a gate hang straight, roll smoothly, and latch securely. That means hinges, posts, rails, rollers, latches, locks, and custom-welded frame repairs. In University Park, we see everything from century-old ornamental iron gates to modern steel tube-frame gates, and the parts work is what keeps them all functioning.
Most hinge, roller, latch, and weld repairs are finished in a single visit, usually within two to four hours on site. Post replacement takes longer because the concrete footing has to cure before the gate goes back under full load, typically a same-day or next-day completion depending on the footing. We’ll give you a straight time estimate when we quote the job.
Most individual part replacements run between $115 and $420, with post work and heavier custom welding landing between $380 and $850. The final price depends on the gate’s weight, the condition of the surrounding metal, and whether previous repairs have to be corrected. Every quote is written, free, and approved by you before work starts. Call (936) 259-0479 for an exact number on your gate.
Yes. We work on Linear, Viking, Ghost Controls, and DoorKing hardware regularly, and we keep compatible parts on our trucks. These brands show up constantly in University Park, Highland Park, and the surrounding Gate Parts & Welding - Dallas neighborhoods. If your gate is another brand, we can almost certainly service it too. We’ll confirm compatibility when you call.
In most University Park cases, yes. We answer the phone live 24 hours a day, and we dispatch same-day for Emergency Gate Parts & Welding in University Park, TX when a gate won’t close, a post has shifted, or a latch won’t secure. Call (936) 259-0479 and tell us what’s happening. We’ll tell you honestly when we can be there and what it will cost before we touch anything.
Every completed job is covered by our written 90-Day Done Right Promise. If the repair fails or the part we installed doesn’t perform, we come back and make it right at no charge. No paperwork, no arguing, no exceptions. It’s the same standard Victor Salinas has held every job to since the company started.
Clear the area around the gate so we can work unobstructed, and move any vehicles out of the driveway if the gate is the driveway entrance. If you have pets, keep them inside or secured while we’re working. You don’t need to have any tools or parts on hand. We bring everything needed, and we’ll walk you through the repair before we start. If you want to be home for the work, great. If not, we’ll call you with updates and leave the gate properly secured when we finish.
Schedule Your Gate Parts & Welding Service in University Park Today
Call Ironworks Gate Co. at (936) 259-0479 for a free, no-obligation estimate on gate parts and welding in University Park. A live person answers 24 hours a day, every day. We’ll inspect your gate, quote the repair in writing before any work begins, and stand behind the finished job with our 90-Day Done Right Promise. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving University Park since 1984.