Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.





Fast, Reliable Gate Repair Across North Dallas
Gate repair in North Dallas typically runs $185 to $740 depending on the failure, and most jobs are completed in a single visit. We work Preston Hollow, Bent Tree, Prestonwood, and Northwood Hills every week, so our crews know the difference between a gate that failed from age and one that failed from blackland clay shifting the post. If your gate won’t open, sags at the hinge, or groans under load, call (936) 259-0479 and a live person answers, day or night.
North Dallas has more automated ornamental iron driveway gates per square mile than nearly anywhere else in Texas. That concentration means one thing for us: we see the failure patterns before they become emergencies, and we stock the parts to fix them on the first trip.
Why Ironworks Gate Co. Is North Dallas’s Preferred Gate Repair Company
We are a dedicated gate company. We are not a handyman who also fixes gates, and we are not a garage door shop that takes gate calls on the side. Ironworks Gate Co. was founded in 1984, and we have spent over 42 years doing one thing: building, repairing, and automating driveway and estate gates. Our technicians are trained and equipped on nine automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters when your operator is a 15-year-old FAAC and the board fails. We fix it correctly the first time, because we know the board, the wiring, and the gate it is bolted to.
North Dallas homeowners tend to live in the same house for decades. They remember the last contractor who promised a fix and disappeared. We are the opposite. Every completed job carries the 90-Day Done Right Promise in writing. If it is not right, we come back and make it right. No paperwork, no arguing, no exceptions. Our technicians are background-checked, uniformed, and guided by the K.E.Y.S. standard: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first.
North Dallas response times run fast because our crews are already working the corridor along Preston Road and the Dallas North Tollway most days. We do not have to dispatch from across the metroplex and fight an hour of traffic. When you call about a gate that will not close on a Friday evening, you want a technician who knows the streets between Royal Lane and Forest Lane, not someone learning your neighborhood from a map.
Key Takeaways: Gate Repair in North Dallas
- Most gate repairs in North Dallas cost $185-$740, quoted and agreed before any work starts.
- The dominant local failure is blackland clay heave tilting posts and binding operators, especially in Preston Hollow and Bent Tree.
- 1970s ornamental iron gates with aftermarket automation often crack at the retrofit weld and need a welder on the same call.
- Every job carries the written 90-Day Done Right Promise. If it is not right, we return and make it right.
- A live person answers (936) 259-0479 24 hours a day, 7 days a week. Not a voicemail, not an answering service.
Our Gate Repair Services in North Dallas
Electric Gate Repair
Electric Gate Repair in North Dallas usually means the operator works but the gate does not, or the gate works but the operator will not stop faulting. The most common culprits in this area are heat-degraded capacitors, corroded limit switch connections, and control boards damaged by Winter Storm Uri in 2021. We carry replacement boards and capacitors for LiftMaster, FAAC, BFT, and Linear operators, so most electric gate repairs are finished in one trip. The price is set before we turn a single bolt.

Automatic Gate Repair
Automatic gate repair in North Dallas often comes down to the marriage between an old iron gate and a newer operator. Many of the homes in Preston Hollow and the Hillcrest corridor have 1970s ornamental iron gates that were retrofitted with automation decades ago. The aftermarket weld-on hinge brackets corrode at the frame, the gate sags, the safety photocell trips, and the operator faults. We fix the gate structure and the operator together, so the repair holds. A typical automatic gate repair runs $240 to $620 depending on the failure.

Hinge & Post Repair
Hinge and post repair is the most underrated gate service we provide in North Dallas. The blackland prairie clay under this part of the city heaves with every drought-flood cycle. After a heavy rain, saturated clay expands and shifts gate posts out of plumb. After a long drought, the same clay contracts and the post settles crooked. A gate that bound and groaned after the last storm is usually not an operator problem; it is a post problem. We reset posts in concrete footings sized for clay movement, replace worn hinge pins and bearings, and realign the gate so the operator stops fighting the structure. Expect $220 to $480 for a typical hinge and post repair.

Gate Realignment
Gate realignment in North Dallas is the fix for a gate that drags, sticks, or will not seat the strike plate. It is the most common repair we do after a wet spring. When clay heave moves one post a quarter inch, the gate does not close square. The operator over-torques, the chain or rack wears, and the safety sensors misread. We bring the gate back to plumb, adjust the rack and pinion or chain tension, and re-set the strike plate so the gate closes like it did when it was hung. Realignment runs $185 to $340 in North Dallas when the posts are sound.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Dallas
We are certified to service nine gate-automation brands, and in North Dallas that matters more than most places. The estates along Preston Road have everything: a LiftMaster on one driveway, a FAAC two streets over, a BFT on a Bent Tree estate, and a Linear on a 1980s Prestonwood home. Our technicians carry boards, capacitors, limit switches, and remotes for all of them, so we are not ordering a part and coming back next week. When we say we will fix it in one visit, we mean it.
Common Gate Repair Problems We See in North Dallas Homes
- Clay heave tilts posts after heavy rain. North Dallas sits on expansive blackland prairie clay that swells when wet and shrinks when dry. The movement pushes gate posts out of plumb, binds swing and slide gates, and forces operators into overload faults. We reset posts in clay-tolerant footings and realign the gate so the operator runs clean.
- 1970s retrofit welds crack at the frame. On Preston Hollow and Hillcrest estates, we regularly find ornamental iron gates that were converted from manual swing to automated decades ago. The weld-on hinge brackets corrode and crack where they meet the iron frame, the gate sags, and the safety photocell trips. This usually needs a welder on the same call as the operator technician.
- Solar operators fail at the battery and board. Long driveways in the northern stretches of North Dallas make running mains power expensive, so many owners choose solar. After a summer of 100°F heat, the capacitors degrade. After a winter freeze, the control board can fail. When the gate is dead at the end of a 300-foot driveway, we replace the battery, board, or actuator and test the panel output.
- Strike plates and latches misalign with the seasons. A gate that latched fine in August will not seat in March. The clay expansion and contraction shifts the strike plate just enough to prevent the electronic lock from engaging. We re-shim and re-set the strike plate, and replace the lock if the bolt is worn.
Pricing for Gate Repair in North Dallas, TX
Here is what gate repair costs in North Dallas, quoted honestly. A simple gate realignment runs $185 to $340. Hinge and post repair with concrete resetting runs $220 to $480. Electric gate repair, including board or capacitor replacement, runs $240 to $520. Full automatic gate repair with welding runs $320 to $740 depending on the extent of the structural work and the operator parts. These are the ranges we quote in this market, and the price is agreed in writing before we start. Estimates are free, and we offer $50 off any repair over $250, a free second opinion on any written estimate, and an $89 seasonal tune-up. Seniors and veterans get 5% off, always.
We Also Serve Cities Near North Dallas
Our Gate Repair in North Dallas crews also cover University Park, Farmers Branch, Lakewood, and Dallas proper. If you live just outside North Dallas and need a gate specialist, call us. The same written promise applies everywhere we work.
Serving North Dallas, TX - Our Local Coverage Area
We’re based in the North Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in North Dallas
Your gate is binding after rain because the blackland prairie clay under North Dallas swells when saturated and shifts the gate post out of plumb. The post tilts a fraction of an inch, the gate catches, and the operator trips an overload fault. This is endemic to North Dallas and far less common in the sandier soils of Garland or Fort Worth. The fix is resetting the post in a deeper, clay-tolerant footing and realigning the gate. Call (936) 259-0479 for an exact quote; estimates are free.
Usually not. What we find on 1970s Preston Hollow estates is that the aftermarket weld-on hinge bracket has corroded and cracked at the iron gate frame, letting the gate sag enough to trip the safety photocell and stall the operator. On one Preston Hollow job, our crew cut out a failed bracket, welded a reinforced plate, reset the hinge post footing in the clay, and realigned the rack and pinion so the gate closed square, same call, one technician and one welder. The operator was fine. Call (936) 259-0479 and we will diagnose it correctly.
Yes, and we do it regularly for the larger properties along the northern stretches of North Dallas where running mains power is impractical. We size the panel and battery to the gate weight and the operator draw, and we specify a heavy-duty swing or slide operator for a 20-foot span. The key is matching the solar output to the actuator demand, not just bolting a kit on. A full solar automatic gate installation runs $2,400 to $4,800 for a 20-foot gate. Call (936) 259-0479 for a free measure and a written price.
The loop detector has failed, or the loop wire under the driveway has broken. The operator still works because the keypad sends a signal directly to the board, but the exit loop cannot trigger the open cycle. In North Dallas, clay movement is a frequent cause: the ground shifts enough to snap the loop wire under the asphalt. We test the detector, and if the wire is broken, we install a new loop or switch to a free-exit probe sensor where the driveway surface allows. Call (936) 259-0479 and we will get it sorted.
Winter Storm Uri destroyed hydraulic actuator lines and fried unprotected control boards across thousands of North Dallas properties in February 2021. If you smell burnt electronics, the control board or a capacitor has failed, possibly an actuator line has split. We still see these failures surfacing years later as boards degrade and finally give out. We replace the board, repair or replace the actuator, and harden the new components against voltage spikes. Call (936) 259-0479 for a diagnosis and an upfront price.
Call Ironworks Gate Co. for Gate Repair in North Dallas
A gate that will not close is a security problem. A gate that will not open is a trap. Either way, you want it fixed today, by someone who knows North Dallas gates the way you know your own street. Call (936) 259-0479 and a live person answers, 24 hours a day, 7 days a week. We will quote the price before we start, do the work in one visit when possible, and stand behind it with the written 90-Day Done Right Promise. Done right, and backed in writing. That is the whole offer.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving North Dallas and the Dallas-Fort Worth metro since 1984.
Before
After
Before
After
Before
After