Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.





Fast, Reliable Gate Access Control Across North Dallas
Gate access control in North Dallas means keypads, intercoms, phone entry, and card readers for automated driveway gates, and it is work we do every week in Preston Hollow, Bent Tree, and along the Preston Road corridor. Most access control repairs in North Dallas run between $185 and $475 for keypad replacement or wiring repair, while full video intercom installs typically land between $1,200 and $2,800 depending on the gate and existing wiring. Our team serves North Dallas daily with background-checked, uniformed technicians. If your gate is not answering the keypad or the intercom went quiet, call (936) 259-0479 and a live person will answer, day or night.
Why Ironworks Gate Co. Is North Dallas’s Preferred Gate Access Control Company
We have been working on gates since 1984, and there is a reason North Dallas homeowners call us before anyone else: this neighborhood has more automated ornamental iron driveway gates than almost any other part of Texas, and we know exactly how they fail here. The clay, the wind, the retrofits from manual to automated, the 1970s weld points. When we show up in Preston Hollow or Northwood Hills, we usually know what we will find before we even open the gate. That local knowledge saves North Dallas customers money because we bring the right parts on the first trip instead of making three trips to diagnose a keyboard that will not hold a code.
Victor Salinas leads our team, and he holds every technician to a simple standard: the 400th job gets the same care as the first. Every completed access control job in North Dallas is backed by our written 90-Day Done Right Promise. If it is not right, we come back and make it right. No paperwork, no arguing, no exceptions. North Dallas homeowners tend to have lived in their homes for twenty years or more. We build work that matches that timescale.
Our Gate Access Control Services in North Dallas
Access control is the layer between the gate opener and the person trying to get in. It is the keypad on the post, the phone that rings when a guest arrives, the camera that shows you who is at the gate. We handle the full range across North Dallas, and these are the systems we service most often.
Keypad Entry
Keypads are the workhorse of North Dallas access control. We replace failed keypads, rewire corroded connections, and reprogram codes on every major brand. In North Dallas specifically, we see keypad failures after heavy rain when surface water finds its way into the keypad housing or the underground conduit between the post and the operator. A keypad replacement in North Dallas typically runs $185 to $350 installed, depending on whether we are reusing the existing wiring or pulling new low-voltage line.

Phone Entry
Phone entry systems let a guest dial a code or press a button and ring the homeowner’s phone, mobile or landline. North Dallas estates with long setbacks need this more than most, because walking from the house to the gate is a five-minute round trip. We install and repair cellular-based phone entry units that work even if the property has no traditional phone line. On the Preston Hollow and Hillcrest corridors, these are common upgrades for homes built in the 1960s and 70s that still have original gate hardware but need modern access.

Video Intercom
A video intercom lets you see and speak with whoever is at the gate before opening it. In North Dallas, where driveway gates often sit 50 to 150 feet from the front door, video intercoms are becoming standard on estate properties. We install wired and wireless video intercom systems that integrate with your existing gate opener, and we repair older systems that North Dallas homeowners have been nursing along for years. A full video intercom install in North Dallas runs $1,200 to $2,800 for residential gates, depending on the camera type, monitor placement, and the condition of the existing wiring.

Remote Control
Remote controls are the simplest form of access control, and we program and supply replacement remotes for every brand we service, including LiftMaster, FAAC, BFT, and Linear. North Dallas homeowners often call because a remote worked yesterday and stopped today, which usually points to a receiver issue or a frequency conflict with a neighbor’s system, not a bad remote. We diagnose the receiver as well as the remote, so you are not buying a new remote every year when the real problem is in the operator.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Dallas
We are trained and equipped on nine gate-automation brands, and in North Dallas the most common units we touch are LiftMaster, FAAC, BFT, and Linear. That matters because a technician who only knows one brand will swap parts until something works. We stock common parts and receivers for North Dallas jobs, which means faster turnaround on a keypad or intercom failure. If you have a Viking or Linear system in Bent Tree, a FAAC operator in Prestonwood, or a LiftMaster in Northwood Hills, we service it the same. Our team carries the programming protocols for all of them on the truck.
Common Gate Access Control Problems We See in North Dallas Homes
- Post footing heave from saturated blackland clay. North Dallas sits on expansive clay that swells with rain and shrinks in drought. When the post shifts, the operator binds, and the rack and pinion strips or the motor stalls. Access control then gets blamed when the keypad will not open the gate, but the root cause is the post, not the keypad.
- Wind-loaded hinge cracking on large solid infill gates. High wind loads on a big ornamental gate flex the hinge post, cracking original cast welds and leaving the gate sagging on the latch side. The keypad and intercom still work, but the gate will not close cleanly, which trips the safety loop and leaves the gate stuck open.
- Storm-damaged control boards. A lightning strike or power surge from a North Texas storm can fry an unprotected control board in an instant. This is common across North Dallas after severe weather, especially on homes without surge protection at the operator. The gate stops responding to remotes and keypads, and the fix is a board replacement plus a surge suppressor added to prevent a repeat.
- Retrofit weld failures on 1970s and 80s gates. Many North Dallas estates were built before gate automation was standard, so the automation was added later with weld-on hinge brackets. Those welds corrode, crack, and eventually fail, usually at the iron frame. The keypad and phone entry stop working properly because the gate is no longer moving smoothly through its arc.
Pricing for Gate Access Control in North Dallas, TX
We believe in quoting a price before any work begins, and we put it in writing. Keypad replacement in North Dallas runs $185 to $350 on most residential gates. Remote programming or replacement runs $75 to $150 including the transmitter. Phone entry systems run $400 to $900 for a basic cellular unit installed, while a full video intercom install runs $1,200 to $2,800. Control board replacement after a storm typically lands between $350 and $700 depending on the board required for your operator. Here is the breakdown:
- Keypad replacement: $185 to $350
- Remote programming or replacement: $75 to $150
- Phone entry system (cellular unit installed): $400 to $900
- Video intercom install (residential): $1,200 to $2,800
- Control board replacement after storm or surge: $350 to $700
We also offer a Free Second Opinion on any written estimate, $50 off any repair over $250, an $89 seasonal tune-up, and a standing 5% discount for seniors and veterans in North Dallas. The price we quote before work starts is the price you pay. There are no surprises on the bill.
How to Manually Open Your Gate During a Power Outage in North Dallas
When a North Texas storm knocks out power, the gate will not respond to the keypad or the remote, and that is when we see homeowners force the gate open by hand. Do not do that. Every automated gate has a manual release, usually a lever or a keyed mechanism on the operator itself. If the operator has a lever, pull it to disengage the motor. If it has a keyed release, use the key that came with the operator. Then push the gate slowly by hand. Forcing the gate without disengaging the operator breaks the gear train or bends the arm, and that turns a power outage into a $500 repair. If you cannot find the release or the gate will not budge after disengaging, call us at (936) 259-0479. We will walk you through it over the phone, and if you need a technician, we dispatch to North Dallas the same day.
We Also Serve Cities Near North Dallas
Our Gate Access Control team handles access control work across the North Dallas metro, and we regularly serve homeowners in University Park, Farmers Branch, Lakewood, and Dallas proper. If you live in North Dallas or any of the surrounding communities, we are already working in your neighborhood. Read more about our work in Gate Access Control in North Dallas, or call and ask for Victor directly.
Serving North Dallas, TX - Our Local Coverage Area
We’re based in the North Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in North Dallas
North Dallas sits on expansive blackland prairie clay that swells when wet and shrinks when dry, and every drought-flood cycle moves the soil enough to push gate posts out of plumb. A post that tilts even a few degrees binds the operator, strips the rack and pinion, and makes the gate stall halfway through its arc. The fix is resetting the post footing in concrete below the active soil line, then re-leveling the operator so the gate moves freely again. If this keeps happening to your North Dallas gate, call (936) 259-0479 and we will assess the footing and the soil behavior together.
Find the manual release on the operator, usually a lever or a keyed mechanism. Pull the lever or use the key to disengage the motor, then push the gate slowly by hand. Never force the gate without disengaging the operator, because you will break the gear train or bend the operator arm. If you cannot locate the release or the gate will not move, call us at (936) 259-0479, and a live person will help you through it.
The two most common storm failures we see in North Dallas are water intrusion into the keypad housing and a power surge that damages the control board inside the operator. Water in the keypad shorts the contacts and wipes the stored codes, while a surge on the board kills the receiver so the gate stops responding to everything, including remotes. We diagnose both during a single visit, and we recommend a surge suppressor at the operator for any North Dallas gate that has been through one electrical storm this year.
Yes, and we do this regularly. The important part is assessing the existing iron frame and hinge points before adding automation, because a 1970s gate that has never been automated may need weld repair at the hinge brackets and a post footing reset before the operator and video intercom go on. Our techs do the weld repair and the access control install on the same visit, which saves you a second mobilization. A retrofit video intercom install in Preston Hollow runs $1,200 to $2,800 depending on the gate and wiring.
Yes. A safety photocell, also called a photo eye or safety beam, stops the gate from closing when anything, a car, a child, a pet, a delivery truck, breaks the beam across the gate opening. It is a code requirement for automated gates in Texas, and we install them on every new automation and repair any photocell that has failed. If your North Dallas gate closes on vehicles or objects that cross the path, your photo eye is likely misaligned, dirty, or dead, and you should get it corrected before the gate hurts someone. Call (936) 259-0479 for a free estimate on a photo eye replacement or alignment.
Call Ironworks Gate Co. for Gate Access Control in North Dallas
If you live in North Dallas and your gate keypad, intercom, phone entry, or remote has quit, call (936) 259-0479. A live person answers 24 hours a day, 7 days a week. We will give you a straight answer over the phone, quote a price before any work begins, and back the completed job with our written 90-Day Done Right Promise. Estimates are free. Senior and veteran discounts apply, always. And if you already have a written estimate from another company, bring it to us for a Free Second Opinion. We are the gate company North Dallas calls when they want it done right, once.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving North Dallas and the surrounding communities since 1984.
Before
After
Before
After
Before
After