Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across North Dallas
Gate parts and welding in North Dallas usually means one of three things: a hinge that’s torn loose, a post that’s leaning out of plumb, or a weld that finally gave way after years of clay-soil shifting. We handle all three, same visit, with a written price before we touch a bolt. Ironworks Gate Co. has been repairing ornamental iron and steel driveway gates across Preston Hollow, Bent Tree, Prestonwood, and Northwood Hills for over 42 years, and we stock the brackets, hinges, rollers, and steel plate our North Dallas crews need most. If your gate is sagging, dragging, or binding, call (936) 259-0479 and a live person answers, day or night.
Key Takeaways:
- Most hinge, post, and weld repairs in North Dallas are completed in a single visit.
- Clay-soil heave is the root cause behind most leaning posts and binding operators here.
- Every job is covered by our written 90-Day Done Right Promise.
- Price is agreed before work starts. No surprises on the bill.
Why Ironworks Gate Co. Is North Dallas’s Preferred Gate Parts & Welding Company
North Dallas homeowners know their gates. Many have lived with the same ornamental iron driveway gate for twenty or thirty years, and they can tell the difference between a weld that will hold and one that won’t. That’s why our Gate Parts & Welding team works the way a blacksmith would: cut out the bad metal, fit the new steel tight, and make the weld stronger than the original. We were founded in 1984 and plan to be working North Dallas driveways for another forty years, which means we answer for our work long after the truck leaves.
Our technicians are background-checked and uniformed. They work on your property the way they’d work on their own mother’s. And when we say we’ll be there, we’re there. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, with crews running North Dallas routes weekly. Response to Preston Hollow or Hillcrest is usually same day or next morning for non-emergency work.
Every North Dallas job, from a hinge replacement to a full post reset, carries our 90-Day Done Right Promise in writing. If it’s not right, we come back and make it right. No paperwork, no arguing.
Our Gate Parts & Welding Services in North Dallas
We focus on the metal: hinges, posts, rails, rollers, latches, and the welds that hold everything together. North Dallas gates fail in predictable ways, and we’ve seen every one of them.
Hinge Replacement
Hinges on North Dallas gates take a beating from clay-shifted posts and wind load. A hinge that’s worn or torn at the weld point lets the gate sag until it drags across the driveway. We replace hinge assemblies with properly rated steel or stainless hardware, weld the new hinge plates to the gate frame, and re-hang the gate so the operator doesn’t fight the weight. Most hinge replacements in North Dallas run $180-$450 depending on gate size and hinge count.
Post Replacement
Post replacement is the unglamorous heart of gate work in North Dallas. The blackland prairie clay under this part of the city expands when wet and contracts when dry, and over a decade or two it will push even a well-set post out of plumb. We dig the old footing, set the new post deeper with compacted base material, and weld or bolt the gate back square. On 1970s estate gates in Preston Hollow, we often find the original footings were poured shallow, which is why the post shifted in the first place. A full post replacement with new footing runs $600-$1,400 in North Dallas depending on depth, gate weight, and concrete work.
Rail Repair
Rails bend, rust, and crack at the weld joints, especially on gates that have been welded before by someone in a hurry. We cut the damaged section, weld in fresh rail, and reinforce the joint with plate where the design allows. On solid infill gates, high wind loads during spring storm season turn a small rail crack into a full separation within weeks. Rail repair in North Dallas typically runs $250-$600 per section.
Custom Welding
Custom welding covers the odd jobs: cracked pickets, broken scrollwork, mounting brackets for new operators, strike plate reinforcement, and retrofit work where a manual gate was converted to automated. Last spring in Preston Hollow, our crew pulled a 1970s ornamental iron swing gate that had been converted from manual to automated years ago. The aftermarket weld-on hinge brackets had corroded at the iron frame, the gate had sagged enough to drag across the driveway, and the LiftMaster operator was fighting a losing battle against the clay-shifted hinge post. We cut out the cracked brackets, welded in new steel plate, reset the post in a deeper footing with compacted base, and re-hung the gate so the operator moved it like it was new. That’s the kind of job that keeps us busy in this part of North Dallas. Custom welding work runs $150-$500 for most repairs, more for involved fabrication or multiple weld points.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Dallas
We’re trained and equipped on nine gate-automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, DoorKing, Elite, Ghost Controls, and Mighty Mule. That matters in North Dallas because the 1970s and 1980s estates along Preston Road and the Dallas North Tollway corridor run everything from original Viking hydraulics to newer Ghost Controls and DoorKing operators bolted onto fifty-year-old iron. When a weld repair requires moving or remounting an operator, our tech knows the mounting patterns and torque specs for whichever brand is on your driveway. We stock common hinge brackets, weld plates, rollers, and strike hardware locally, so most North Dallas repairs finish same visit.
Common Gate Parts & Welding Problems We See in North Dallas Homes
- Clay-shifted hinge posts. The blackland prairie clay under North Dallas expands and contracts with every drought-flood cycle. Posts that were plumb a decade ago are now leaning, which binds the swing arc and misaligns the strike plate. This is the most common call we get west of Hillcrest.
- Retrofit weld failures on 1970s gates. Preston Hollow and Northwood Hills are full of original manual gates that got automated in the 1990s and 2000s. The aftermarket weld-on hinge brackets corrode and crack at the iron frame, and the gate starts sagging. These need a welder and an operator tech on the same call, not two separate appointments.
- Storm and wind damage. Solid infill gates catch serious wind during North Texas storm season. Posts bend, footings crack in saturated ground, and a misaligned gate quickly becomes an emergency. We see this most after heavy spring rains when the clay is fully swollen.
- Freeze damage from February 2021. Winter Storm Uri destroyed hydraulic actuator lines and fried unprotected control boards across thousands of North Dallas properties. Some of those repairs got deferred, and we still see the fallout: operators that work intermittently, boards that fail on cold mornings even when the gate itself is fine.
Pricing for Gate Parts & Welding in North Dallas, TX
Here’s what we quote in North Dallas, in writing, before any work starts:
- Hinge replacement: $180-$450
- Post replacement with new footing: $600-$1,400
- Rail repair per section: $250-$600
- Custom welding (cracked pickets, bracket mounts, strike plate work): $150-$500
- Gate roller replacement: $120-$300 per roller set
- Latch and lock repair or replacement: $90-$250
What moves the price: gate weight, whether we’re working with iron or steel, how deep the old footing runs, and whether an operator has to be removed and remounted to do the weld right. We quote a fixed price before the first bolt turns, so the number we agree on is the number on the invoice. Estimates are free. Call (936) 259-0479 and we’ll send a uniformed technician to measure and quote, usually within a day or two.
We Also Serve Cities Near North Dallas
While this page covers Gate Parts & Welding in North Dallas, our crews also run regular routes through University Park, Farmers Branch, Lakewood, and Dallas proper. If you’re just outside the North Dallas line, call anyway. Chances are we have a truck nearby.
Serving North Dallas, TX - Our Local Coverage Area
We’re based in the North Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in North Dallas
The clay swells when it takes on water and shrinks when it dries, which over years pushes gate posts gradually out of plumb. Once a post leans, the gate’s weight shifts onto the hinge that’s now carrying more than it was designed for, and that hinge tears or the weld cracks. We correct it by resetting the post in a deeper footing with compacted base, then re-hanging the gate on new hardware rated for the load. Call (936) 259-0479 if your gate is starting to drag or the gap at the latch is closing up.
Every automated gate has a manual release mechanism, usually a keyed cylinder or a pull handle on the operator unit itself. On most LiftMaster, Viking, and DoorKing models, you insert the key, turn, and pull the release handle to disengage the motor, which lets you swing or slide the gate by hand. If you cannot find the release or the gate won’t move freely even when disengaged, leave it secured as best you can and call us. A stuck gate after a storm is often post damage, not an operator fault.
Those gates were originally hung as manual gates on hinge pins set into the stone or steel posts. When they were later automated, aftermarket weld-on hinge brackets were added to mount the operator arms, and those brackets were frequently welded to the iron frame with minimal surface prep. Forty years of moisture, heat cycles, and clay-driven post movement later, the weld interface corrodes and cracks. We cut out the failed bracket, prep the iron properly, and weld in a heavier steel plate matched to the gate’s profile. The fix is permanent when done right.
It depends on which gave way first. If the post is still plumb and the sag is from a torn hinge weld or a cracked rail, we can often weld and re-hang the gate without touching the footing. If the post itself has moved, no amount of panel welding will fix it. The gate will sag again within months because the post is still leaning. We measure the post with a level before quoting, so you only pay to fix what’s actually broken. Most North Dallas sagging-gate calls are a mix: a leaning post plus a worn hinge, and both get addressed in the same visit.
If your gate reverses when it meets resistance, stops cleanly at its open and close limits, and the photo-eye or contact edge still trips when blocked, the basics are intact. What we check after a storm or freeze goes further: the condition of the control board, wire connections at the motor, actuator lines on hydraulic units, and whether the operator is still correctly aligned after the gate shifted. North Dallas saw a wave of operator failures after February 2021’s freeze, and many boards that “kind of work” now fail outright during the next cold snap. If your gate hesitates, beeps oddly, or runs slower than it used to, call (936) 259-0479 and we’ll check it before it leaves you stuck outside.
Ready to Have Your North Dallas Gate Fixed Right?
If your gate is sagging, dragging, or refusing to close, don’t wait until a post fails completely and the gate comes off its hinges. Call Ironworks Gate Co. at (936) 259-0479 and a live person will answer, day or night. We’ll schedule a technician for your North Dallas home, quote a fixed price before work begins, and stand behind the repair with our written 90-Day Done Right Promise. $50 off any repair over $250, a free second opinion on any written estimate, and a 5% senior and veteran discount always. The company that makes a 40-year-old gate close like the day it was hung.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving North Dallas for over 42 years.