Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Highland Park, TX
When a driveway gate in Highland Park stops opening, you usually find out at the worst possible moment. You’re leaving for work, the remote clicks and nothing happens, or the gate groans halfway and seizes up. On the tree-lined streets near Lakeside Drive or the estates off Preston Road, a gate that won’t close is more than an irritation. It’s the front door to a property you’ve cared for over decades.
We’re Ironworks Gate Co., and we work on gates in Highland Park every week. That means our crews know the wrought iron, steel, and wood-automation combinations common to this neighborhood’s older homes and newer builds alike. A live person answers when you call (936) 259-0479, any hour, any day. Tell us what the gate is doing, and we’ll schedule a Highland Park service call without bouncing you through a call center.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Highland Park Homeowners Choose Ironworks Gate Co.
Highland Park homeowners don’t tend to hire the cheapest option. They hire the company that shows up on time, diagnoses the problem honestly, and doesn’t leave a mess in the driveway. That’s the standard Victor Salinas set when he started Ironworks Gate Co., and it’s the standard our uniformed technicians carry into every Highland Park job.
We’re background-checked and trained on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, and others. Whether your opener is original to a home near the Dallas Country Club or a newer install in the Fairfield neighborhood, our techs have worked on that exact control board before. Most gate repairs in Highland Park are completed in one visit, with the price settled upfront before a single bolt is turned. And every completed job carries the 90-Day Done Right Promise in writing. If it’s not right, we come back and make it right. No arguing, no fine print.
Gate Repair Services We Offer in Highland Park
Gate Repair
Sagging hinges, bent frames, welded joints that cracked after forty winters, wheels dug into the track. In Highland Park, we repair gates that original builders would still recognize. We quote the price before work begins, and most repairs are finished the same day we arrive.
Learn more about our Gate Repair in Highland Park.
Gate Installation
A new gate in Highland Park has to match the house. Whether you’re replacing a rotted wooden driveway gate or installing ornamental steel with automation, we measure, fabricate, and set it square. We’ll schedule a free measure and give you a written price for the full project.
Learn more about our Gate Installation in Highland Park.
Gate Motor & Opener
If your opener hums but won’t move the gate, or the gate opens halfway and reverses, the motor may be fighting the limit switches or a failing capacitor. We service and replace openers from LiftMaster, FAAC, BFT, and Linear, and we stock common control boards in the truck.
Learn more about our Gate Motor & Opener in Highland Park.
Gate Access Control
Keypads, intercoms, telephone entry, and vehicle sensors all have to work together. We wire Gate Access Control - Highland Park so the gate opens for you but not for the cut-through traffic. A failed keypad in Highland Park is usually fixed in the same visit.
Reach us at (936) 259-0479 to schedule access control service in Highland Park.
Gate Parts & Welding
Sometimes the gate itself is fine, and the problem is a broken wheel, a rusted post cap, or a hinge that’s never been greased. We handle Highland Park Gate Parts & Welding on-site when we can, which saves time and keeps the original look. This is blacksmith work, and we take it seriously.
Reach us at (936) 259-0479 to talk through gate parts and welding in Highland Park.
Neighborhoods We Serve in Highland Park
We run service calls across Highland Park throughout the week. Our typical response window for gate repair in the area is same-day or next-morning, depending on when you call and what the gate is doing.
- Old Highland Park, near Lakeside Drive
- Fairfield, east of Preston Road
- The estates along Beverly Drive
- Armstrong Parkway area
- St. Johns Drive corridor
Why Highland Park’s Climate & Housing Affect Gate Repair
Highland Park sits on the heavy gumbo clay of the Blackland Prairie. This soil expands when wet and contracts during dry North Texas summers, which is a polite way of saying the ground under your gate moves. Piers shift slowly over years. A gate that swung true when it was hung can begin to drag or bind as the posts drift out of plumb. In Highland Park, we routinely correct gates that are no longer square because the clay underneath them has heaved. That means adjusting the hinges, resetting the posts, or re-hanging the leaf so it closes cleanly again.
The housing stock matters too. Many Highland Park homes were built between the 1920s and the 1960s, and their driveway gates often sit close to the house with mature trees overhead. That mix of old steel, settling foundations, and North Texas storms means our techs carry welding equipment and a full set of opener diagnostics on every call. A gate that won’t close on a street like Lakeside Drive needs the same care as the house behind it.
Pricing for Gate Repair in Highland Park
Here’s what you can expect to pay for common gate repairs in Highland Park. These are honest ranges, quoted in writing before any work begins.
- Service call and diagnostic: $89
- Hinge replacement (pair): $180 to $340
- Opener control board replacement: $250 to $550
- Wheel or track replacement: $150 to $400
- Full gate motor replacement: $900 to $2,400 depending on brand and swing weight
- Seasonal tune-up with lube and limit adjustment: $89
We offer $50 off any repair over $250 and a free second opinion on any written estimate you’ve received from another company. Seniors and veterans save 5%, always. Call (936) 259-0479 and we’ll give you a straight number.
Service Area - Cities Near Highland Park
Our Highland Park crews also serve the surrounding neighborhoods. If you’re in University Park, Farmers Branch, North Dallas, or Lakewood, we can schedule gate repair on the same route.
Serving Highland Park, TX - Our Local Coverage Area
We’re based in the Highland Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Highland Park
Most Highland Park gate repairs run between $150 and $550. A service call with diagnostic is $89, hinge replacements start around $180, and a full motor replacement can run $900 to $2,400 depending on the opener. We give every Highland Park customer a written price before any work begins. Call (936) 259-0479 for an exact quote on your gate.
If you call in the morning, we can usually get a technician to Highland Park the same day. Evening and overnight calls are handled by our live-answer line, and most urgent gate failures are addressed by the next morning. A person answers, not a voicemail tree. Call (936) 259-0479 and tell us what the gate is doing.
Yes. We service LiftMaster, FAAC, BFT, and Linear openers, along with five other major brands. Our techs carry common boards and remotes in the truck, so most Highland Park opener repairs are done in a single visit instead of a two-week parts wait.
A leaning or off-track gate can fall if the wheels let go or a hinge fails. Keep kids and cars clear until a technician looks at it. In Highland Park, we see this most often on older iron gates where the clay soil has shifted the posts. We’ll straighten, re-hang, and re-set the gate so it closes safely. Call (936) 259-0479 and we’ll come out.
Yes. For new gate installation, we’ll schedule a free measure at your Highland Park home and give you a written price for the complete project, including the gate, the opener, and the safety edges. The price is agreed before any fabrication begins. Call (936) 259-0479 to set up a measure.
If your gate in Highland Park needs repair, call (936) 259-0479 now. A live person answers 24 hours a day, and we’ll get your gate closing the way it should. Estimates are free, the price is settled before work starts, and every job is backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Highland Park, TX.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Highland Park Customers Say
"A hydraulic arm was leaking fluid onto the driveway. Replaced, cleaned the stain as best he could, and it has been dry since."
- Erin Sutton"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Eric Padgett