Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Highland Park
A new driveway gate in Highland Park, TX typically runs $4,800 to $14,500 installed, depending on the size, material, and automation package. A pedestrian gate alone usually lands between $1,900 and $4,200. Most Highland Park installations take 2 to 4 weeks from the day you approve the written quote to the day we run the last reversal test. We measure, order, fabricate where needed, and install with the power run and entrapment protection done correctly the first time. Call (936) 259-0479 and a real person answers, day or night.
Why Ironworks Gate Co. Is Highland Park’s Preferred Gate Installation Company
Highland Park is not a city where homeowners gamble on a handyman with a welder in his truck. The homes here run older, the setbacks are stricter, and the gates are expected to look right on a street where every house tells a story. Ironworks Gate Co. has spent over 42 years earning the kind of reputation that gets passed from one neighbor to the next on Armstrong Parkway and Lakeside Drive. Homeowners here call us because someone they trust already did.
Our reputation in Highland Park rests on a simple record: we show up when we say, we quote the job before we start, and we stand behind the work in writing. No gate installation leaves our hands without the 90-Day Done Right Promise attached to it in plain language. If something is not right, we come back and make it right. No paperwork, no arguing, no exceptions. Every technician who works your driveway is background-checked, uniformed, and guided by the K.E.Y.S. code: Krafted right, Every time, Your home first, Standing behind it.
Dispatching and scheduling for Highland Park jobs are coordinated from our Dallas-Fort Worth office, so a crew can typically be on your property within 24 to 48 hours of your call. You will not get routed through a call center or asked to leave a message. You get a live person, and if it is urgent, we will get someone to you fast.
Our Gate Installation Services in Highland Park
Highland Park lots are tight, the parkways are narrow, and the setbacks leave very little room for error. That shapes how we approach every installation here. We do not sell a gate off a menu and force it onto your property. We measure the driveway, look at the grading, check the soil, and spec the gate and operator to fit what is actually there. When you call, you are talking to the people who will do the work.
Driveway Gate Installation
A driveway gate in Highland Park is a statement, but it also has to function every single time you pull in or out. We install single and double driveway gates in steel, iron, aluminum, and wood-framed designs, sized to your actual driveway apron and setback. The work includes the gate itself, the operator, the power run, the safety edges, and the loop detector, all tested together before we leave. In Highland Park, a full driveway gate installation with automation usually falls between $6,500 and $14,500.
Pedestrian Gate Installation
On narrow Highland Park lots, a pedestrian gate often makes more sense than widening the driveway gate. We build and hang pedestrian gates that match your existing fence or driveway gate in height, material, and finish. We handle the hinges, the closer, the latch, and if you want it, a keypad or intercom tie-in. A standalone pedestrian gate in Highland Park typically runs $1,900 to $4,200, installed.
Sliding Gate Installation
Sliding gates are the right call when a swing gate would eat up too much driveway or when the grade slopes toward the house. In Highland Park, many of the estate properties on Preston Road and the streets off Beverly Drive have exactly that problem. We install cantilever and track-style sliding gates with the motor, rack, and guides set for smooth travel even when the ground shifts. Sliding gate installations here generally run $5,000 to $12,000 depending on span and automation.
Swing Gate Installation
Swing gates remain the most common style in Highland Park, and the style most likely to sag or bind if the post footings were not set deep enough for the local soil. We dig footings below the expansive clay line and reinforce them properly before we hang a single leaf. A single swing gate with automation typically runs $4,800 to $9,500 in Highland Park. A double swing gate runs $7,000 to $14,000 with both operators and synchronized control.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Highland Park
We are trained and equipped on nine major gate-automation brands, but in Highland Park we see LiftMaster, FAAC, and BFT most often on existing estates that need new operators fitted to older gates. We stock common boards, receivers, and edge sensors for these brands locally, so a repair or retrofit does not stall waiting on a part from a warehouse across the country. If your existing operator is one of these, we can often match it rather than rip out the whole system. If it is a Mighty Mule or a Ghost Controls unit that was never quite right, we will tell you straight what it will take to make it right, and we will quote it before we touch it.
Common Gate Installation Problems We See in Highland Park Homes
Highland Park has specific failure patterns, and we see them repeat across the neighborhoods year after year.
- Hinge post footings set too shallow for the expansive clay. Highland Park soil swells in spring rains and shrinks in summer heat. A footing poured 18 inches deep may hold for two years, but the first wet-dry cycle heaves the post, and the gate drags or binds mid-arc. We dig deeper and reinforce the base so the post stays put.
- Loop detectors that miss low-slung cars on narrow apron drives. The loop must be tuned to fire on the very first movement of a vehicle off the parkway. On Highland Park’s tight driveway aprons, a poorly placed loop means the gate starts closing while a car’s rear bumper is still over the sensor. Ours fire when the car moves, not when the gate moves.
- Solar operators mounted on north-facing or shaded gates. The first overcast week kills the battery and the homeowner is trapped outside or inside. We will not install solar unless the gate gets direct sun for most of the day. Otherwise, we run power.
- Operators installed without UL 325 entrapment testing on both edges. The code requires tests that prove the gate reverses under resistance. A lot of handymen skip this step. We run the full test on every gate we install or service, and we document it.
Highland Park has strict setback and sight-line rules that often push gate operators closer to the property line than in adjacent University Park. That means the loop detectors and safety photocells must be tuned to fire on the very first vehicle movement, not after the gate starts, to avoid clipping a car waiting on the narrow parkways. We design around that constraint from the beginning, because we have seen what happens when someone does not.
One job on Beverly Drive sticks with us. A fourth-generation estate had a double swing gate sagging so badly the leaves were nearly dragging. The hinge post footing had cracked at the base. Our crew pulled the old post, poured a deeper reinforced footing matched to the soil, hung a new LiftMaster operator with a rack and pinion drive, and ran UL 325 entrapment tests on both edges before we even programmed the keypad entry. The gate closes like the day it was hung.
Pricing for Gate Installation in Highland Park, TX
Highland Park is its own market, and prices here do not always match what you would see across the Trinity in Dallas or up in Farmers Branch. Here is what we quote most often in Highland Park:
- Pedestrian gate: $1,900 to $4,200 installed
- Single swing driveway gate with automation: $4,800 to $9,500
- Double swing driveway gate with automation: $7,000 to $14,000
- Sliding driveway gate with automation: $5,000 to $12,000
- New operator retrofit on an existing gate: $1,400 to $3,800
The final number depends on the gate’s size, the material, the operator brand, and how much site work the install requires. Highland Park’s compact lots and tight setbacks can add labor to the groundworks, which is normal and which we line out on the written quote before we begin. You will know the price before a single bolt is turned, and that price will not change unless you change the scope. Call (936) 259-0479 for a free measure and written estimate. We will come to your home in Highland Park, walk the property with you, and give you a straight number.
We Also Serve Cities Near Highland Park
If you live just outside Highland Park, we have you covered too. Our Gate Installation team serves nearby University Park, Farmers Branch, North Dallas, and Lakewood with the same 90-Day Done Right Promise and the same straight pricing. Read more about our work in Highland Park or call us and we will tell you directly what we can do for your home.
Serving Highland Park, TX - Our Local Coverage Area
We’re based in the Highland Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Highland Park
Highland Park gate installations typically run 10% to 20% higher than comparable jobs in Dallas because the setbacks are tighter, the parkways are narrower, and the soil requires deeper post footings than much of Dallas County. The extra time and cost go into groundworks and the safety tuning, not into markup. Call (936) 259-0479 and we will line out the exact numbers for your property.
In most cases, a new LiftMaster or FAAC operator can be fitted to your existing gate if the gate itself is structurally sound and the posts are solid. We will assess the gate, check the hinge post and the gate’s weight and travel, and tell you whether a retrofit makes sense or whether you are better off replacing the gate now rather than paying twice. The assessment is free.
Any new automatic gate in Highland Park must meet UL 325 standards, which means monitored safety edges or photocells on both directions of travel, plus a properly tuned loop detector system. We run the required reversal tests on every gate we install and document the results before we hand you the keypad code.
Yes, and on narrow Highland Park lots it is often the cleanest way to get in and out on foot without cycling the big driveway gate every time. We will match the new pedestrian gate to your existing fence and driveway gate in height, material, and finish, so it looks like it was always there. Pedestrian gate installations in Highland Park typically run $1,900 to $4,200.
If the gate is sagging, replacing the hinge pins alone rarely fixes it on Highland Park soil. The sag usually means the post footing has cracked or shifted in the expansive clay. We will inspect the post, and if the footing is the problem, we pull the post and pour a deeper, reinforced base. If the post is still solid and the hinge has simply worn, we will tell you that too and fix only what needs fixing. Either way, the quote comes before the work.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Highland Park and the surrounding metro for over 42 years.