Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Dallas
Gate installation in Dallas typically runs $4,800-$13,500 for a standard automated driveway gate, with most projects completed in one to three days on site. The price depends on gate width, material, automation package, and what we find under the clay when we dig. If your gate is binding in August or your builder-grade opener quit in July, call (936) 259-0479 and a live person answers, 24 hours a day, 7 days a week. Ironworks Gate Co. has been doing this work for over 42 years, and we know Dallas clay better than most.
Why Ironworks Gate Co. Is Dallas’s Preferred Gate Installation Company
Dallas homeowners have been calling us since 1984 for one reason: we write the guarantee down. Every gate we install is covered by our 90-Day Done Right Promise. If something’s not right, we come back and fix it. No paperwork, no arguing. That’s the Keystone Standard, and it applies to every job from a Lake Highlands double swing gate to a Prestonwood HOA access point.
Our technicians are background-checked and uniformed, guided by the same K.E.Y.S. values code on job number 400 as on job number one: Krafted right, Every time, Your home first, Standing behind it. Victor Salinas leads our team, and he answers for the work. When you call, you get a live person, not a voicemail tree. That matters at 2 a.m. during an ice storm when your gate won’t close and your granddaughter’s car is sitting outside.
We dispatch from our Dallas-Fort Worth office, so we’re close when you need us. A technician can reach most Dallas neighborhoods the same day for emergency work, and for installations we schedule a measure and a written price before any work begins. You’ll know the number before we turn a single bolt.
Our Gate Installation Services in Dallas
We install the full range of driveway and estate gates across Dallas, and we handle the automation, power, and safety systems that make them work day after day. Here’s what we do most often in Dallas:
Driveway Gate Installation
A new driveway gate in Dallas starts with the soil, not the metal. We set posts below the Blackland Prairie clay line with concrete bell-bottom piers so the gate stays plumb through spring rain and August drought. Most driveway gates we install in Dallas are ornamental iron or steel, paired with one of the nine automation brands we service and stock parts for.
Pedestrian Gate Installation
Pedestrian gates get walked through hard in Dallas, and they’re often the first thing to sag when soil shifts. We install pedestrian gates with deep-set posts and reinforced hinges sized for daily use, not just occasional access. If you’re adding a pedestrian gate beside an existing driveway gate, we’ll match the metalwork so the two look like they were hung the same day.
Sliding Gate Installation
Sliding gates are common on sloped lots in North Dallas and along Preston Road, where a swing gate would need too much clearance. Sliding gate installation in Dallas demands a level track bed and a properly anchored operator pad. We pour both, and we install cantilever rollers or V-track systems depending on your grade and gate weight. No dragging wheels, no fighting the motor.
Swing Gate Installation
Swing gates are what we install most across Dallas, and they’re the most vulnerable to our clay. A swing gate set on shallow posts will shift within a year, hinge post sag follows, and the operator burns out trying to muscle a gate that no longer lines up. We install swing gates with deep footings, adjustable hinges, and operators sized with real torque headroom. That’s the difference between a 40-year gate and a two-year gate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dallas
Our technicians are trained and equipped on nine gate-automation brands, including FAAC, BFT, Linear, and Viking, so whatever is on your driveway, we can install, service, and repair it correctly on the first visit. We keep common parts for these brands stocked for quick turnaround in Dallas, which means fewer return trips and less waiting when your gate is down. If you have a builder-grade operator that came with the house and it’s already struggling, we’ll show you what a proper replacement looks like, and we’ll quote it before we do the work.
Common Gate Installation Problems We See in Dallas Homes
- Posts shifted by reactive clay: Blackland Prairie soil swells after spring rain and shrinks hard in summer, tilting posts out of plumb within a year. We see this on nearly every service call in Dallas, and the fix is a deeper footing, not a bigger motor.
- Builder-grade operators on new construction: Far-north Dallas HOAs often get lift-grade or entry-grade operators that overheat and burn out control boards by their first full summer, especially on west-facing gates with no shade. We replace these with commercial-rated operators sized for Dallas heat.
- Manual gates retrofitted without conduit: Many 1970s-1990s Dallas homes have ornamental iron gates that were never set up for automation. Adding an opener means running power and low-voltage lines, and if conduit wasn’t laid during the build, surface-mounted wiring fails during freeze-thaw cycles. We handle the full power run.
- Missing entrapment protection: Older Dallas gates often lack the required photocells, safety edges, and reversing mechanisms mandated by current code. We install UL 325-compliant safety systems on every gate we build or automate, because a gate that closes on a child or a pet is a failure no warranty can undo.
Pricing for Gate Installation in Dallas, TX
Here’s what Dallas homeowners can expect to pay for gate installation with Ironworks Gate Co.:
- Manual ornamental iron driveway gate (single swing): $3,200-$6,800 installed, depending on width and post depth.
- Automated single swing gate with operator and safety system: $4,800-$8,500 installed.
- Automated double swing gate (two gate panels): $7,500-$13,500 installed, including master/slave operators and entrapment protection.
- Sliding gate with cantilever system and operator: $6,500-$11,000 installed, depending on track bed prep and gate length.
- Pedestrian gate with matching metalwork: $1,200-$2,800 installed.
- Adding automation to an existing manual gate: $2,400-$5,500, including the operator, power run, photocells, and safety edges.
Every quote is written, itemized, and agreed before we start. No surprises on the bill. We also honor our standing Dallas offers: $50 off any repair over $250, a free second opinion on any written estimate, and a permanent 5% senior and veteran discount. Call (936) 259-0479 for a free estimate.
We Also Serve Cities Near Dallas
Ironworks Gate Co. serves the entire Dallas metro. Our Gate Installation team works in Irving, Mesquite, Addison, and Garland, plus every neighborhood across Dallas itself. If you’re a few exits outside the city line, call anyway. We’ll tell you if we can get there and when.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Dallas
Because Dallas sits on Blackland Prairie clay that swells after spring rain and shrinks hard in summer drought, your posts have likely shifted out of plumb. The gate itself didn’t break; the ground moved under it. The fix is excavating and setting the posts deeper, ideally with a concrete bell-bottom pier below the active clay line. We quote the realignment and footing work before we start. Call (936) 259-0479 for a site assessment.
Yes, in most cases. The two big factors are whether the gate swings freely and whether you have a power run from the house to the gate. Many Dallas homes built between 1970 and 1990 have ornamental gates with no conduit in place, so we run power and low-voltage wiring properly, often underground. We install the operator, photocells, safety edges, and any loop detector you need, and we make sure the whole system meets UL 325 entrapment protection standards. Free estimate by phone at (936) 259-0479.
Builder-grade operators that overheat and burn out control boards by their first full Dallas summer. These gates are often spec’d as an amenity, not as daily-use infrastructure. In Prestonwood, we replaced a builder-grade LiftMaster on a double swing gate that had seized by July. After setting new hinge posts in concrete bell-bottom piers below the clay line and adding a loop detector and safety photocells, the gate swings clean even after a week of 100°F heat. If your HOA gate is down every other month, call us and we’ll diagnose it properly.
Yes. Current UL 325 standards require entrapment protection on all automated vehicular gates, including photocells or a reversing edge, and it’s required regardless of where in Dallas you live. We install compliant protection on every gate we build or automate, and we can retrofit older gates that lack it. A gate that can’t sense a child or a pet is dangerous, plain and simple. Call (936) 259-0479 and we’ll inspect what you have.
In Dallas, repeated motor failure almost always traces back to three causes: a gate that’s out of plumb because of clay soil movement, an operator that’s undersized for the gate’s weight and wind load, or direct west- or south-facing sun baking the control board relentlessly. Replacing the operator without fixing the underlying cause is selling the same job twice. We solve the root problem and then size the replacement correctly. Estimates are free, and you’ll have the number before any work starts. Call (936) 259-0479.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Dallas since 1984.