Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Addison
Gate installation in Addison runs between $2,400 and $9,800 for most residential properties, depending on gate style, operator type, and site conditions. We can typically have an estimator to your Addison home within 48 hours, and most installations are completed in one to three days once materials arrive. Ironworks Gate Co. has been building and installing gates for more than four decades, and we know Addison’s soil, its HOAs, and its particular lot layouts well enough to quote you accurately the first time. Call us at (936) 259-0479 and a live person will answer, day or night.
Why Ironworks Gate Co. Is Addison’s Preferred Gate Installation Company
Addison homeowners tend to ask different questions than folks in newer suburbs. Your lots are older, often developed in the 1970s and early 1980s. Your clay soil moves. Your HOA board wants a say in post placement and gate style. We speak that language, because we have installed gates off Belt Line Road, up near Addison Road, and through the neighborhoods south of Arapaho Road for years.
Every installation we do in Addison carries the same written guarantee we have offered since Victor Salinas set the standard for our crews: the 90-Day Done Right Promise. If something is not right, we come back and make it right. No paperwork, no arguing, no exceptions. Most jobs are completed in one visit, with the price settled before a single bolt is turned. Our technicians are background-checked, uniformed, and trained on nine gate-automation brands, so whatever opener is going on your gate, the person doing the work knows it cold.
Our customers in Addison tell us the same things: they were tired of contractors who did not call back, who quoted low and billed high, or who left a gate that sagged by the next spring. Solid work, honest pricing, and a live person on the phone at midnight when the gate will not close. That is the whole offer, and we have stood behind it since 1984.
Our Gate Installation Services in Addison
Driveway Gate Installation
Most Addison driveway gates we install are either single swing gates on older estate lots or double gates on wider entries off streets like Belt Line or Keller Springs Road. We set posts below the clay line, build the frame to hold the weight, and mount the operator so it will still run true after two wet winters and a dry summer. This is heavier steel than a decorative fence panel, and a driveway gate built correctly for Addison clay will outlast one built to generic specifications.
Pedestrian Gate Installation
Pedestrian gates in Addison often sit beside a driveway gate or close off a side yard. They look simple, but if the post is not dug deep enough, the gate will drag within a year. We use the same footing depth on pedestrian gates that we use on driveway gates, because the clay under Addison does not care how small the gate is. Latch alignment, self-closing hinges where the HOA asks for them, and a clean swing arc are all done at the install, not as a later fix.
Sliding Gate Installation
Sliding gates work well on Addison lots where a swing gate would cross a sidewalk or where the driveway slopes slightly toward the street. The rail either sits on a poured concrete guide track or cantilevers above the ground, and the difference matters in Addison. We pour the track level even when the driveway is not, and we set the rack in sections that will stay true as the subgrade expands and contracts. A sliding gate installed poorly will bind within six months; installed properly, it will run quietly for twenty years.
Swing Gate Installation
Single and double swing gates are the most common gate type in Addison, and the one most dependent on post work. Addison’s expansive clay soil pushes shallow posts out of plumb, and once a hinge post leans, the gate sags, the latch misses, and the operator strains. We reset or install every swing gate post with deeper concrete than most crews bother to pour, because we would rather spend the extra hour at install than send a crew back next year to dig the same hole again.
Double Gate Installation
Double gates spanning a wide driveway require two matching leafs, a center latch or drop rod, and an operator sized for the combined weight and wind load. In Addison, we see plenty of double gates on homes near the Addison Circle area and on lots with side-load garages where the full driveway width needs to be usable. We square the posts to each other, not just to the street, and we set the center stop so the two leafs close flush every time. If you want a keypad on both sides and a vehicle loop to open automatically from inside the driveway, we plan for that at the start.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Addison
We install and repair operators from LiftMaster, FAAC, BFT, and Linear, among others. That matters in Addison because an older gate on a 1970s lot often has an operator that is still good but an installation that was never done to code. We would rather repair a well-built older operator than talk you into a replacement you do not need. When a replacement is the right call, we stock the parts and boards our Addison customers most often need, which gets your gate running without waiting on a slow freight shipment. Certified service on nine leading brands means the correct fix on the first visit, whatever is bolted to your post.
Common Gate Installation Problems We See in Addison Homes
- Hinge post lean from clay soil movement. Addison’s expansive clay swells when wet and shrinks when dry. Shallow footings let the soil push posts out of plumb within the first two rainy seasons, and a leaning hinge post makes the gate sag enough that the operator cannot close it consistently. The fix is resetting the post below the active clay line, which we do as part of a proper installation rather than as an emergency repair later.
- Sliding gate track misalignment due to driveway slope or subsidence. Many Addison driveways have a slight fall toward the street. If the concrete guide track is poured level with the ground instead of level with the gate’s path, the gate rides up or digs in. We pour a consistent track line and set the rack so the gate travels straight even on lots with noticeable grade change.
- Missing or disabled entrapment protection. Residential driveways in Addison often back onto sidewalks where kids walk to school or neighbors push strollers. UL 325 requires working photo-eyes or safety edges that reverse the gate on contact or detection. Skipping these is dangerous and illegal. We wire and test every reversal device at install and show you how to confirm it works.
- Undersized operators on double swing gates. A double gate catches more wind and weighs more than a single leaf. Installing a light-duty operator on a heavy double gate in Addison means it will stall, strip gears, or trip its thermal protection on a hot August afternoon. We size operators to the actual gate weight and wind load, not to the cheapest unit that will technically bolt on.
Pricing for Gate Installation in Addison, TX
A single swing gate with a basic operator and keypad in Addison typically runs $2,400 to $4,800. A double swing gate with a LiftMaster or FAAC operator, two keypads, and safety photocells lands between $5,500 and $9,800 depending on gate width and whether we need to run a new power line from the panel. Slide gates run $4,200 to $8,500, with the concrete guide track and rack accounting for a bigger share of the total than on a swing gate. A pedestrian gate with self-closing hardware and a smaller opener starts around $1,800.
What moves the price: post depth and concrete volume, the length of the electrical run from your panel to the gate, whether the site needs a loop detector cut into asphalt or concrete, and the gate’s wind load on a double leaf. You get a written price before we start, and that price is the price. You never sign a blank check for us to fill in after the work is done. Call (936) 259-0479 and we will schedule a free on-site measurement and written estimate.
We Also Serve Cities Near Addison
Our crews regularly install gates in Addison and the surrounding Dallas County communities. We also serve Carrollton, Richardson, Irving, and Coppell. If you live in one of those cities and need a gate built right, you get the same pricing, the same guarantee, and the same crew standards. If you are considering an automatic gate, our Gate Installation team can walk you through the options for your property and your HOA’s requirements.
Serving Addison, TX - Our Local Coverage Area
We’re based in the Addison area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Addison
Swing gate posts in Addison should be set at least 36 to 42 inches deep, which gets the footing below the active zone of clay expansion and contraction. Shallow 24-inch footings, which are common on cheaper fence jobs, will heave and lean within two rainy seasons. For heavy double gates or gates with operators, we go 42 inches or deeper and use a wider concrete collar to resist the lateral push of the clay as it swells. Post depth is the single biggest determinant of whether your gate still closes perfectly five years from now. Call (936) 259-0479 and we will check your soil and gate weight before recommending a footing depth for your specific site.
Most automatic driveway gate installations in Addison require an electrical permit for the power run and operator connection, and some subdivisions also require HOA design review before any new gate goes up. Gate operators draw power and include safety devices, so the town treats them as electrical work, not just as a fence project. We handle the permit paperwork and the HOA submission drawings as part of the installation. If your HOA board has a specific gate style or setback rule, tell us when you call and we will factor it into the plan rather than fighting it after the post holes are dug. Call (936) 259-0479 for a free estimate, and we will help you sort out what your specific property needs.
Solar openers work on double swing gates only in limited conditions. Addison’s weather includes long cloudy stretches in winter and short winter days that cut into the charging window, and a double gate uses twice the current of a single. For most Addison homes, we recommend a hardwired AC operator with a battery backup, which is more dependable year-round and does not leave you stranded after a week of overcast skies. If running power to the gate is impractical or too expensive, a properly sized solar system with a quality panel and battery bank can work, but we size the panel to the worst month, not the best. Call (936) 259-0479 and we will walk you through what makes sense for your driveway and budget.
The fix is a level concrete guide track and a rack set in line with the gate’s true path, not with the existing ground slope. Many Addison driveways fall gently from the garage to the curb, and if a crew sets a track on the existing pitch, the gate tries to climb a slope every time it opens. We pour the track level across its length and shim the gate frame so the wheels sit square, which keeps the gate rolling straight even on a noticeable grade. We also set the end stops so the gate cannot roll past its travel and torque the rack off its mounts. A slide gate done this way does not bind, and it does not wake up your neighbor at 6 a.m. with a screech.
Automatic gate operators in Addison must comply with UL 325, which means every gate needs working entrapment protection: photo-eyes, a reversing edge, or both, plus a properly adjusted obstruction sensor in the operator itself. Addison driveways often sit near sidewalks where pedestrians and children pass, so this is not a paperwork detail. The gate must reverse on contact and when the photo-eye beam is interrupted, and the operator must be set to the correct force limit for the gate’s weight. We run a full reversal test on every installation and show you how to test it yourself after we leave. Call (936) 259-0479 if you have an existing gate you suspect is not compliant, and we will send a technician to check it.
Addison Gate Installation Done Right, Backed in Writing
We have been installing gates for over 42 years, and we plan to be doing it in Addison for another forty. That means our installs are built for this town’s clay soil, its HOA rules, and its older lots, not for a generic spec sheet. Our crews reset shifted hinge posts properly, run the electrical to code, wire the safety edges and photocells, and test every reversal before we hand over the keypad codes. Your price is on paper before the first bolt turns. The work is guaranteed by the 90-Day Done Right Promise, and a live person answers our phone 24/7 if anything ever comes up.
If you are thinking about a new driveway gate, a replacement operator, or a double swing gate for a wide entry off Belt Line Road or Keller Springs, call (936) 259-0479 today. We will schedule a free site measurement, give you a written price, and get your gate installed so it stays right.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Addison with honest gate work since 1984.