Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Lakewood
Gate parts and welding work in Lakewood usually comes down to one of three things: a post that has heaved out of plumb from the lake-adjacent clay, a hinge that has finally rusted through after eighty years, or an operator control board that quit after one too many limit-switch trips. We fix all three, and we do it with a live person on the phone around the clock. Our crews work in Lakewood neighborhoods every week, and we quote the price before a single bolt gets turned. Call (936) 259-0479 and you’ll reach a human being, not a voicemail tree.
Why Ironworks Gate Co. Is Lakewood’s Preferred Gate Parts & Welding Company
Ironworks Gate Co. has been doing gate work for over 42 years, and the Gate Parts & Welding side of our trade is where the craft shows most. Lakewood homeowners tend to have gates worth saving: original 1920s Tudor ironwork, Colonial Revival driveway gates, garden gates hung when the house was built. That is not the kind of metal you trust to a generalist. Our welders work with the same care on a 90-year-old wrought iron hinge as they do on a modern steel post shoe. Victor Salinas, who leads our crews, has spent decades matching original iron profiles so a repair blends in rather than standing out.
We serve Lakewood directly from our Dallas-Fort Worth office, and dispatch is local enough that our techs know Abrams Road from Gaston Avenue without a GPS. Every technician is background-checked and uniformed. Every job carries the 90-Day Done Right Promise in writing. If it is not right, we come back and make it right. No paperwork, no arguing.
Our Gate Parts & Welding Services in Lakewood
Hinge Replacement
Lakewood’s older iron gates were typically hung on cast-iron or early steel strap hinges that have now spent seven or eight decades in North Texas humidity and lake-adjacent air. The hinge pin rusts, the strap cracks at the weld, and the gate leaf starts to drop. We replace hinges with matched-profile steel that carries the same visual weight as the original, and we weld them hot so the connection outlasts the post. A hinge replacement on a single swing leaf in Lakewood typically runs $180 to $420, depending on how much of the original mount has to be ground out and rebuilt.
Post Replacement
This is the most common job we do east of Abrams. The black-cotton clay around White Rock Lake shrinks and swells with every wet-dry cycle, and it pushes hinge posts out of vertical on a repeating schedule. The gate did not get hit by a car. The ground moved under the footing. We dig out the old footing, set a new post deeper with concrete that reaches below the shrink-swell zone, and rehang the gate square. Post replacement in Lakewood generally runs $350 to $900 per post, with the higher end covering tall decorative posts or poor access.
Rail Repair
On older ornamental gates, the top and bottom rails take decades of stress from a slowly sagging leaf. The rail cracks at the stub weld, or the pickets pull loose where they pass through the rail. We straighten, sleeve, or replace rails and then re-weld every picket connection. Rail repair in Lakewood typically costs $150 to $400, depending on the amount of rail that has to come out and the profile match.
Custom Welding
Some Lakewood gates were built by a blacksmith who retired forty years ago, and no off-the-shelf part will match. That is where custom welding earns its keep. We hand-forge replacement scrolls, rebuild missing finials, fabricate latch brackets, and weld cracked cast iron using the right rod for the alloy. Custom welding rates in Lakewood run $95 to $150 per hour, with most small fabrication jobs landing between $200 and $600.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lakewood
We carry and service parts for the operators most often found on Lakewood driveways: LiftMaster, FAAC, BFT, and Linear, among others. When a legacy Viking or DoorKing board fails, we source the compatible OEM replacement before we arrive. Our Lakewood stock includes common hinge profiles, post shoes, and control board cross-references so most jobs finish the same day.
Common Gate Parts & Welding Problems We See in Lakewood Homes
- Hinge posts heave out of plumb from lake-adjacent clay shrink-swell. A gate that bound against the latch post in July may swing freely by February. You are not imagining it; the soil moved. The fix is a deeper footing, not another adjustment.
- Original cast-iron pivot pins and hinges from the 1920s through 1950s rust through at the post connection. The hinge looks fine until it is not, and then the whole leaf drops at once. We see this most on gates that face north and stay damp longer.
- Legacy gate operators with obsolete control boards fail after repeated ground shifts cause repeated limit-switch trips. Every heave cycle forces the operator to work harder until the board gives out. Sometimes the board is the only problem; sometimes the post movement killed it and both need attention.
- Latch posts and strike plates wear past adjustment after decades of use. We rebuild or replace the latch mount and re-square the strike so the gate closes like it did when it was hung.
Pricing for Gate Parts & Welding in Lakewood, TX
For Lakewood, expect these ranges on common repairs:
- Hinge replacement on one leaf: $180-$420
- Post replacement (dig out, set new footing, rehang): $350-$900 per post
- Rail repair or section replacement: $150-$400
- Custom welding and fabrication: $95-$150 per hour, most small jobs $200-$600
- Gate roller replacement: $90-$250
- Latch and lock rebuild or replacement: $120-$350
The price you are quoted is the price you pay. We write it down before the first weld, and we do not pad it after the fact. Estimates are free. Call (936) 259-0479 and Victor Salinas or one of our techs will walk you through it.
We Also Serve Cities Near Lakewood
Lakewood is home base for this page, but our crews work a wider ring around it. If you are in University Park, Farmers Branch, North Dallas, or Dallas proper, the same team and the same 90-Day Done Right Promise apply. Lakewood’s gate issues do not stop at the neighborhood line, and neither do we.
Serving Lakewood, TX - Our Local Coverage Area
We’re based in the Lakewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Lakewood
Because the weld was probably fine. The post moved. Lakewood sits on black-cotton expansive clay, and the added soil moisture from White Rock Lake makes the ground heave and settle in a cycle that pushes hinge posts out of vertical on a repeating basis. A weld only fixes what the hinge did; it cannot stop the footing from shifting. When a Lakewood gate goes out of alignment three or four times, the answer is usually a post reset with a deeper footing, not another weld. Call (936) 259-0479 and we will tell you honestly which one you need.
You can replace just the hinge if the post is still plumb and the metal around the hinge mount is sound. On Lakewood’s 1940s-era gates we check the post for clay movement before we touch the hinge. A hinge welded onto a moving post is wasted money. We will tell you which situation you have, show you on the level, and price it accordingly. The quote is free.
In most cases, yes. We cross-reference legacy Viking and LiftMaster boards to compatible OEM replacements and stock the common ones for Lakewood service calls. If the board is truly obsolete and no direct replacement exists, we will tell you that too, and we will price a retrofit operator honestly rather than stringing you along. Call (936) 259-0479 and ask for Victor; he handles the control board cases personally.
Yes. A 1930s gate was built long before UL 325 entrapment protection existed, and an operator moving a heavy iron leaf without a photocell or contact edge is dangerous, full stop. We will not wire an old operator back into service without bringing the entrapment protection up to current code. It is a safety item, not an upsell. The photocell and sensor edge add roughly $150 to $400 to the job depending on the operator.
There is a fix that lasts a very long time, though no footing on expansive clay is literally permanent forever. The solution is to excavate the old footing, set the post deeper so the concrete bears below the zone where soil moisture fluctuates, and sometimes use a helical pier or a larger diameter pour for heavy decorative posts. Done this way, a Lakewood post will hold for decades instead of years. We price post reset work at $350 to $900 per post. Call (936) 259-0479 and we will come measure it.
The Lakewood Clay Problem, Explained
Here is the thing about gate posts in this neighborhood that no other city’s page can tell you. Lakewood sits right on the edge of White Rock Lake on the same black-cotton expansive clay that gives Dallas foundations so much trouble. But the localized ground moisture from the lake makes the shrink-swell cycle here more aggressive than it is in the sandier suburbs farther out on the metro fringe. When the clay dries, it contracts and pulls away from the footing. When it rains, it swells and pushes. Over twenty or thirty cycles, a hinge post that started dead vertical ends up two or three degrees off, then five, then more. The gate starts to bind. The operator fights it. Eventually the hinge pins wear oval, the board trips its limits, and everything needs work at once.
On a tree-lined street near White Rock Lake, we reset the hinge post on a 1930s Tudor’s original wrought iron swing gate after the black-cotton clay beneath the footing shifted the post 17 degrees off vertical. The gate operator was a legacy Viking unit with a cracked control board. We sourced a compatible OEM replacement, rebuilt the pivot hinge, and added a safety photocell to bring the entrapment protection up to current UL 325 code before rehanging the gate. That job is the Lakewood pattern: keep the iron, fix the ground, update the safety, and the gate runs like it did in 1935.
When to Retrofits, When to Replace
Most Lakewood iron gates deserve to be saved. The original scrollwork, the proportions, the way the gate fits the house, none of that can be bought off a shelf today. So our first instinct is always repair: rebuild the hinge, reset the post, reinforce the rail, rehung the leaf. That works when the metal itself is still sound. If the gate has rusted through in multiple places, if the rail is more sleeve than original, if the pickets have pulled loose in a dozen spots at once, replacement starts to look like the better use of your money. We will tell you which one makes sense and price both options in writing. No pressure either way.
Call Ironworks Gate Co. for Gate Parts & Welding in Lakewood
If your Lakewood gate is sagging, binding, or the operator has quit, call (936) 259-0479. A live person answers, any hour of any day. We will schedule a time, show up when we say, put the quote in writing before any work begins, and stand behind the job with the 90-Day Done Right Promise. Victor Salinas and our Lakewood crews have been keeping old gates closing right for decades, and we plan to be doing it for decades more.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Lakewood homeowners with gate parts and welding done right and backed in writing.