Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Addison
Gate parts and welding in Addison usually come down to one of three problems: a hinge post that’s leaning, a rack that’s stripped, or a weld that finally let go after years of tollway vibration. We fix all three, and we fix them right the first time. Ironworks Gate Co. has served Addison homeowners and businesses for over 42 years, and we know exactly what the I-635 and Dallas North Tollway corridor does to a gate over time. Call (936) 259-0479 and a live person will answer, day or night. We’ll get a technician to your Addison property fast, with the right parts on the truck.
Why Ironworks Gate Co. Is Addison’s Preferred Gate Parts & Welding Company
Addison is a tight 4.4 square miles, and word travels fast here. We’ve earned our reputation in Addison the slow way: one straight answer at a time. Homeowners along Belt Line Road, office managers near Quorum Drive, and HOA contacts in Addison Circle all tend to ask the same thing: will it stay fixed? Our written 90-Day Done Right Promise answers that. If it’s not right, we come back and make it right. No paperwork, no arguing.
Our crews know Addison’s streets. We route from the Dallas-Fort Worth office and get to most Addison addresses within a couple of hours for repair calls. That matters when a gate is stuck open on Arapaho Road at 7 a.m. and the whole parking lot is exposed. We carry common hinge sizes, rack sections, and roller bearings for the brands Addison properties actually use: LiftMaster, FAAC, BFT, and Linear among them. Victor Salinas, who leads our team, insists on one standard for every job: Krafted right, every time, your home first, standing behind it. The 400th job gets the same care as the first.
We’re background-checked and uniformed. We quote the price before any work starts, agreed in writing, so the bill never surprises you. And when you call at 11 p.m. because a gate won’t close, a live person picks up. Not a voicemail tree.
Our Gate Parts & Welding Services in Addison
Most Addison gate failures come down to metal fatigue, ground movement, or operator force. Here’s what we handle most often. For a wider look at what we do, see our Gate Parts & Welding team’s full service scope.
Hinge Replacement
On swing gates across Addison, the hinge takes more abuse than any other part. When a gate operator is set too aggressive, the hinge post absorbs the shock. We replace worn hinge barrels, pins, and plates, and we match the new hardware to the gate’s weight and swing radius. Off Beltway Drive in the Addison Circle area, we replaced a set of sagging LiftMaster hinges on a gate where the operator had been dialed too high. The post had shifted in its footing. We reset it, swapped the hinges, and re-aimed the safety photocell that had been knocked out of alignment. That gate now reverses on a two-by-four test the first time, every time.
Post Replacement
Addison sits on clay-heavy soil, and it moves. A gate post set in an undersized footing will lean within a few seasons, especially within a half-mile of the tollway where constant micro-vibration works the concrete loose. We cut out the failed footing, pour new concrete at the right depth for the gate’s mass, and re-plumb the post before the panel goes back on. This is the fix that keeps a gate from dragging on the ground six months after a “panel only” repair.
Rail Repair
Slide gates along Arapaho Road and Midway Road run high cycles daily. The rack and pinion teeth strip, and the gate jams mid-track. We replace rack sections, re-time the motor, and check the guide rollers so the gate runs straight instead of chewing through the next rack. On commercial entrances near the tollway, we recommend heavier-duty rack if the gate cycles more than 40 times a day.
Custom Welding
Not every gate part comes off a shelf. When an Addison homeowner has an ornamental gate with a broken scroll or a mangled frame corner, our welders fabricate the replacement. We work in steel and aluminum, match the existing profile, and grind the repair smooth before paint. Custom welding is also the right path for reinforcing a gate that’s been hit, or adding a steel backing plate where a latch keeps tearing out.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Addison
We’re trained and equipped across nine gate-automation brands, including LiftMaster, FAAC, and BFT, which covers nearly every operator we encounter in Addison driveways and commercial lots. That means we don’t have to guess at a control board’s fault codes. We read them, diagnose them, and fix them correctly on the first visit. We keep a running stock of common parts for these brands on our trucks, so a hinge or a safety edge doesn’t turn into a two-trip repair. Whatever is on your gate, we know it.
Common Gate Parts & Welding Problems We See in Addison Homes
- Hinge posts leaning from tollway vibration. The constant rumble from I-635 and the Dallas North Tollway transmits through the soil and works post footings loose over time, especially on older Addison properties where footings were poured shallow. The gate starts dragging, then the operator burns out trying to overcome the bind.
- Rack and pinion teeth stripping on slide gates. High-cycle gates at tollway-adjacent commercial entrances and on residential lots along high-traffic streets like Belt Line Road wear rack teeth down to nubs. The gate then lurches or stalls mid-track, and the motor strains against a stripped gear.
- Safety photocells knocked out of alignment. On Addison’s narrow lots, gates sit tight to driveways and alley lines. Repeated operation and occasional bumps put the beam out of line, and the operator refuses to close, which is exactly what UL 325 entrapment protection is designed to do. The fix is usually alignment, not replacement.
- Sag correction that ignores the post. Well-meaning repairs get done on the panel only, leaving a hinge post that’s out of plumb in clay-heavy soil. The gate sags again within a season. The post has to be reset before any panel work means anything.
Pricing for Gate Parts & Welding in Addison, TX
A hinge replacement on a standard single swing gate in Addison typically runs $250 to $480, depending on hinge size and whether the post needs re-plumbing. Post replacement runs $450 to $850 for a standard residential post with new concrete footing; a heavy commercial post can push higher. Rail repair on a slide gate usually falls between $300 and $600 for rack section replacement with re-timing. Custom welding is quoted by the repair: a broken scroll or frame corner typically costs $150 to $400. Every price is quoted and agreed in writing before we turn a single bolt. Call (936) 259-0479 for a free estimate, and ask about our $50 off any repair over $250, the free second opinion on any written estimate, and the permanent 5% senior and veteran discount. We serve all of Addison with these same honest ranges.
We Also Serve Cities Near Addison
Our crews cover Addison and the surrounding North Dallas corridor daily. If you’re in Carrollton, Richardson, Irving, or Coppell, the same team, the same 90-Day Done Right Promise, and the same live-answer phone line serve you as well as they serve Addison. One call handles it from any of these nearby cities.
Serving Addison, TX - Our Local Coverage Area
We’re based in the Addison area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Addison
Because the panel wasn’t the problem. On Addison’s clay-heavy soil, the hinge post is usually the culprit: it leans in its footing under gate weight and tollway vibration, and a panel-only repair just re-sags within a season. The fix is resetting the post in new concrete before re-hanging the panel. Call (936) 259-0479 and we’ll check the post first, because that’s where the sag actually lives.
On a high-cycle gate along Arapaho Road, the rack and pinion teeth are the usual failure. The motor pinion strips the rack, the gate loses drive, and it stalls. We replace the rack section, re-time the motor, and check the rollers so it doesn’t strip again in a year. Call (936) 259-0479 for a quote, and we’ll have a technician out to diagnose it same day.
Yes. UL 325 requires entrapment protection on any automated gate, existing or new. Most Addison properties we see already have photocells or safety edges, but older gates in neighborhoods off Keller Springs Road sometimes don’t, and some were bypassed by previous owners. We test what’s there, replace failed sensors, and add protection where it’s missing. Call (936) 259-0479 and we’ll tell you exactly what your gate needs.
We can, but welding is usually the wrong first move. Most hinge posts near Addison Airport fail at the footing, not the steel. If the post itself is cracked or the hinge is torn from the post, we weld the repair and reinforce the area. If the post has shifted, we reset the footing. Either way, we’ll quote it before any work starts. Call (936) 259-0479 for a free estimate.
Most residential swing gate hinge and post replacements in Addison are completed in a single visit, usually five to seven hours including concrete set time. We use fast-setting mix for the footing, then test the gate’s full travel and safety reverse before we leave. Call (936) 259-0479 and we’ll give you a written price and a realistic window before we start.
If your gate in Addison is dragging, stuck, or the welds are cracking, call (936) 259-0479. A live person answers, 24 hours a day. We’ll quote the job before we start, do it right, and hand you a written 90-Day Done Right Promise when we’re done. That’s the Keystone Standard on every job, in every Addison neighborhood, every time.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Addison with gate repair, parts, welding, and automation expertise.