Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterLinear Gate Access Control in University Park: What to Know First
We service and repair Linear gate access control systems across University Park as an independent Linear service provider, not a manufacturer-authorized shop. Most Linear keypad, phone entry, and receiver work we handle is completed in a single visit, with the price quoted and agreed before we turn a single bolt. If your Linear keypad stopped reading codes or the gate no longer responds to remotes, this page tells you what is actually wrong, what it should cost, and how we fix it. Call (936) 259-0479 and a live person answers, day or night.
This page is written for University Park homeowners with Linear equipment on the driveway: keypads, remote receivers, phone entry, card readers, and intercom tie-ins. You want a straight answer about the equipment on your gate, not a sales pitch. That is what we do.
How Linear Products Fail - and How We Fix Them
Linear has been around since the early 1960s and built a reputation on solid radio receivers and keypads that survive weather they have no business surviving. But every product line has its weak points, and in University Park we see the same handful of failures repeat themselves season after season. Here is what actually goes wrong.
- Linear APeX and MegaCode receivers losing remotes after a storm. The MegaCode protocol is a rolling-code system, which is a good thing until a nearby lightning strike or a power flicker scrambles the receiver memory. The gate still runs fine from the keypad, but every remote goes dead at once. The fix is usually a full receiver reset and reprogramming of all remotes, not replacing the receiver itself. We see this two or three times every spring in University Park.
- Linear keypads that read every code as wrong. The Linear AK-11 and AK-15 keypads show up on a lot of University Park side gates, and their common failure is the membrane or button contacts wearing out from direct sun and heat. The pad still lights up, but the numbers do not register. Some shops quote a whole new keypad. In many cases we replace the damaged face or clean and reseal the contact points and get another few years out of it. When it is beyond that, we recommend the newer Linear DX series keypad, which holds up better on west-facing brick posts.
- Linear MDR line receivers with a drifting frequency. The older MDR-NR and MDR-U receivers drift off-frequency as their internal capacitors age. The symptom is maddening: the remote works from twenty feet away on Tuesday and two inches away on Thursday. It is not the remote. Replacing the receiver with a current Linear MegaCode unit, properly grounded, fixes it for good. We have sorted out more of these than we can count in University Park, Highland Park, and Preston Hollow.
- Intercom and phone entry systems that buzz but do not open. The Linear AE-100 and AE-200 telephone entry systems are solid, but the relay that fires the gate motor wears out. The visitor calls from the keypad, the phone rings, the homeowner presses 9, and nothing happens. The relay is a replaceable part. You do not need a new phone entry system, and you do not need to rip out the wiring. We replace the relay and test the whole loop.
- Aftermarket keypads and receivers that never worked right from day one. We have inherited jobs where a previous installer put a generic keypad or receiver on a Linear gate motor and it never paired correctly. The gate opens when it feels like it, or every remote is on the same frequency as a neighbor’s gate. The correction is a matched Linear access set installed and programmed to the motor’s own control board, with all remotes and keypad codes learned in one visit. No surprises.
Our Linear Gate Access Control Process
Tell me what it is doing, and I will tell you what it needs - no more, no less. That is how we run every Linear job in University Park, from start to finish.
- 1
Call and describe the symptom. You call (936) 259-0479, a live person answers, and we ask what the gate is doing or not doing. That conversation tells us which parts to bring on the first trip.
- 2
On-site diagnosis. We come out, test the keypad or receiver at the gate, check the control board on the motor, and confirm exactly what has failed. We explain it in plain English before we touch anything. You know the problem and the fix.
- 3
Upfront price. We quote the repair, the parts, and the labor as one written number, and you approve it before work starts. No open-ended hourly billing, no surprise line items later.
- 4
Parts decision. Where a Linear OEM part is available and gives the best value, we use it. Where a quality aftermarket part from the same supply lines will do the same job for less, we tell you that plainly and let you decide. That is the square deal, and we do not keep it a secret.
- 5
Repair and programming. We replace the failed part, land the wires correctly, learn the remotes and keypad codes, and set the gate travel limits and force settings to match. Then we test it from the street, from the driveway, and from inside the property.
- 6
Cleanup and walkthrough. We leave the job site cleaner than we found it and walk you through exactly what was changed and why. You get the 90-Day Done Right Promise in writing before we leave.
What Linear Gate Access Control Costs in University Park
Gate access control repair is not a mystery, and it should not be priced like one. Here are the numbers we quote most often in University Park, before any discounts.
- Residential keypad replacement (Linear AK-11, AK-15, or DX series): $240 to $480 installed, depending on wiring condition and whether the post needs rework.
- Remote receiver replacement with MegaCode unit, including two remotes: $320 to $560.
- Telephone entry relay repair on an AE-100 or AE-200: $180 to $320, which beats replacing the whole unit.
- Full phone entry system replacement with installation and programming: $1,400 to $2,600 depending on system features and post access.
- Gate motor integration with new Linear access control when the existing board cannot accept modern hardware: $520 to $900, including wiring and programming.
What moves the price is the age of the gate wiring, whether the post is brick or steel, and how far the gate sits from the house for a phone entry run. We quote every job up front, in writing, and the price you approve is the price you pay. Estimates are free. Call (936) 259-0479 for an exact number on your Linear system.
Why University Park Homeowners Call Ironworks Gate Co. for Linear Work
Ironworks Gate Co. has been at this since 1984, and most of the Linear repair calls we run in University Park come from people who have already tried the general handyman route and ended up with a gate that works when it wants to. That is not how we leave a driveway.
Our technicians are trained and equipped on nine gate automation brands, including Linear, LiftMaster, Mighty Mule, Ghost Controls, and DoorKing. When a Linear board refuses to talk to a new keypad, or a Viking motor is mislabeled as a Linear failure, we sort it out on the first visit instead of coming back three times. Every job is backed by the 90-Day Done Right Promise in writing, and the price is settled before a single bolt turns. A live person answers the phone 24 hours a day, seven days a week. That is Victor Salinas’s standard for every truck that rolls out, and it has been for the better part of three decades working gates across University Park and the streets around it.
FAQs
If your Linear equipment is still under the manufacturer’s warranty, we recommend contacting Linear directly first, because we are an independent service provider and not an authorized warranty station. For equipment that is out of warranty, which is the case for nearly every Linear system we see in University Park, our repair work does not affect any current coverage, and every job carries our own 90-Day Done Right Promise in writing. Call (936) 259-0479 and we will tell you straight what applies to your system.
Yes. Linear, now part of the Nortek Control family, still supports the MegaCode and APeX platform parts, and we keep common receivers, keypads, and relays in our stock. For older MDR-series gear, we source quality aftermarket replacements from the same supply lines when OEM parts have been discontinued. If your part is a week out, we tell you that before we order it, not after.
In most cases, yes. We carry the receivers, keypads, relays, and remotes that cover the large majority of Linear failures in University Park, and most access control repairs are completed in one visit. For phone entry systems or hardwired intercoms with deeper electrical faults, we will give you a straight timeline before any work begins. Call (936) 259-0479 and a live person will tell you what same-day looks like at your address.
That depends on the condition of the gate motor and the wiring, not just the keypad. If your Linear gate motor is still in good working order, repairing or upgrading the access control is almost always the right money. If the motor is also failing, a full system replacement with matched Linear gear is often cheaper over five years than patching it three times. We will show you the math both ways and let you decide.
The Linear DX series keypads, the MegaCode receivers, and the AE series phone entry systems are the ones we install most often on University Park gates. They are proven in our climate, parts are available, and they pair well with both Linear and non-Linear gate motors when wired correctly. Call (936) 259-0479 and we will tell you which setup fits your gate. Estimates are free.
If your Linear gate access control is giving you trouble in University Park, call Ironworks Gate Co. at (936) 259-0479. A live person answers 24 hours a day, seven days a week. We will quote the job before we start, fix it right, and back it in writing.
Written by Victor Salinas, Owner & Gate Repair Specialist, Ironworks Gate Co. at Ironworks Gate Co., serving University Park and nearby areas.