Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in North Dallas, TX | Ironworks Gate Co.
Ghost Controls Gate Repair - North Dallas comes down to one thing most other shops miss: the blackland clay under your gate posts. When that clay shifts, your operator takes the beating. We’re Ironworks Gate Co., an independent Ghost Controls service provider serving North Dallas, and we fix the whole system: the operator, the mount, the post, and the swing arc. Call (936) 259-0479 for a straight answer and a free estimate.
We are not manufacturer-affiliated or authorized by Ghost Controls. We’re a local gate company that has rebuilt Ghost Controls swing and slide operators across Preston Hollow and Bent Tree for years, specializing in the retrofit-era failures that independent repair shops often misdiagnose as board issues. When your Ghost Controls TSS1 or AXDP starts acting up in North Dallas, the board is rarely the whole story.
Why North Dallas Residents Choose Us for Ghost Controls Service
Victor Salinas grew up in Oak Lawn and has spent the better part of three decades working gates across University Park and the surrounding neighborhoods. He learned the fundamentals at Eastfield College, where a shop instructor told him early on that a gate is only as honest as the person who fixes it. That advice has never left him, and it shapes how our Ghost Controls sales & service work gets done across North Dallas.
We’re local to North Dallas service area, which means we know what the clay does to a gate post in July and what it does again in February. We stock OEM Ghost Controls control boards and gear sets for faster turnaround, and we machine our own stainless steel hinge brackets when the job calls for something stronger than factory iron. Most repairs are completed in a single visit, with the price settled before a single bolt is turned. No surprises on the bill, and a live person answers the phone 24 hours a day.
Common Ghost Controls Gate Repair Problems We Solve in North Dallas
- Stripped plastic gear sets on heavy ornamental iron gates. Ghost Controls operators work fine on lighter gates, but on a Preston Hollow double iron gate with repeated auto-close cycles, a gate that is even slightly out of plumb will chew through the plastic output gear. The clay movement is usually what started it.
- Phantom openings from corroded control board terminals. North Dallas summers bring high humidity cycle after cycle. Factory control boards corrode at the JST connector terminals, and the gate opens on its own at 2 a.m. A board swap that ignores the condensation path just sets up the next failure.
- Dead-zone remote failures on long estate driveways. The OEM Ghost Controls receiver antenna is small for a 300-foot driveway with hills and iron fencing near Preston Road. We install extended-range antenna kits and reposition receivers to kill the dead zones.
- Split hydraulic actuator lines on older conversions. Many 2010s-era Ghost Controls retrofits ran hydraulic lines along the post. Winter Storm Uri cold snaps froze and split those lines across North Dallas, and we still get calls for the leaks that were patched improperly afterward.
- Cracked retrofit weld brackets on 1970s iron gates. This one is almost exclusive to vintage North Dallas estate homes. Aftermarket weld-on hinge brackets from the manual-to-automatic conversion era corrode and crack right at the iron gate frame. The fix requires a welder on the same call as the operator tech.
Ghost Controls Service in North Dallas: What Local Conditions Mean for Your Equipment
The cut-stone and iron gates along Strait Lane and Park Lane in Preston Hollow were almost all built in the 1960s and 70s with manual-only hinge posts set directly into blackland clay, no concrete piers. That detail matters more than any operator spec. When a Ghost Controls system gets retrofitted onto one of those gates, the post was never designed to carry a motor’s torque. The clay heaves in the drought, swells after a rain, and the post tilts. The operator then fights the gate on every cycle until something gives: usually the gear set, sometimes the mount bracket, occasionally the board. We reset the post in a concrete pier, rebuild the swing arc, and only then mount the operator. Skipping the post work and swapping in a new board is how a $400 repair becomes a $1,800 repeat call in North Dallas. We see it every month, and we’d rather fix it the one time.
Our tech tore down a Ghost Controls TSS1 on a 1972 Preston Hollow estate after the gate had sagged 1.5 inches on its hinge side following a September rain. The operator’s plastic output gear had stripped from repeatedly fighting the clay-shifted post. We called our welder to cut off the cracked 1970s retrofit brackets, reset the post in a 30-inch pier, and rebuilt the swing arc before installing a new DTP1 operator with a heat-sinked control board. The gate now closes with no auto-reverse faults.
Ghost Controls Models & Products We Service in North Dallas
We service the full Ghost Controls residential line: TSS1 single gate openers, DTP1 dual gate openers, AXDP automatic gate locks, and the VEHICLE SENSOR KIT. When a control board or gear set needs replacing, we use OEM Ghost Controls parts. But for the hinge brackets and post mounts, we often machine aftermarket stainless steel because the factory iron brackets fail repeatedly on North Dallas’s shifting clay. We also stock common parts locally so a North Dallas service call doesn’t wait a week on a shipped component.
If a Ghost Controls operator was undersized for a heavy double iron gate from the start, we’ll tell you honestly. Our Gate Installation in North Dallas is sometimes the smarter money than repeated gear repairs. Tell me what it is doing, and I will tell you what it needs - no more, no less.
Ghost Controls Service Pricing in North Dallas
Ghost Controls repair pricing in North Dallas typically falls between $180 and $340 for common operator fixes, including a new plastic gear set or a limit switch adjustment. Control board replacement runs $280 to $475 depending on the model and whether condensation damage reached the harness. Full operator replacement with labor starts around $650 and goes up for heavy double gates. Post resetting in clay soil, including pier encapsulation, runs $400 to $900.
Every job gets a written quote before we touch anything. The price is agreed upfront, and it does not change unless you add scope. Call (936) 259-0479 for a free estimate on your Ghost Controls system. We’ll walk the gate, measure the swing, and give you a number you can hold us to.
Serving North Dallas, TX - Our Local Coverage Area
We’re based in the North Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in North Dallas
It’s almost always corrosion at the JST connector terminals on the control board. North Dallas clay swells after rain, and the board housing picks up condensation from the humidity spikes. That moisture bridges the terminals and the board reads a phantom open command. We replace the board with a sealed heat-sinked unit and address the venting so it doesn’t recur. Call (936) 259-0479 for a same-week service call.
Sometimes yes, sometimes no. If the operator is a DTP1 sized for the gate’s weight and the posts are solid, we can add stainless steel brackets and a heat-sinked board. If the operator was undersized from day one, no amount of reinforcement changes the math. We’ll give you the straight answer and quote both directions.
Bent Tree driveways are long, and the hills plus iron fencing block the factory receiver antenna. We install an extended-range antenna and reposition the receiver head for line of sight. Most Bent Tree calls are resolved in one visit with no operator replacement needed.
North Dallas summers bake the clay and the track shifts slightly. The gate wheels then catch on the high spot and jump. We realign the track and reset the wheel assemblies, and if the post has moved, we reset it in a concrete pier. A jumping gate only gets worse the longer it runs.
Often yes. The retrofit-era hinge brackets on those 1960s and 70s gates crack at the iron frame, and a bolt-on patch won’t hold. We bring a welder on the same call and do the bracket replacement and the operator work in one visit. Call (936) 259-0479 and we’ll tell you what your gate actually needs.
Service Areas Near North Dallas
We serve Ghost Controls service in University Park, Ghost Controls service in Farmers Branch, Preston Hollow, Bent Tree, Lakewood, Richardson, and the surrounding Dallas neighborhoods. If you’re in North Dallas or just outside it, we’re close by.
Book Your Ghost Controls Service in North Dallas Today
Call (936) 259-0479 and a live person answers, 24 hours a day. We’ll schedule a service call, give you a free estimate, and stand behind the work with our 90-Day Done Right Promise. Done right - and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving North Dallas since 1984.