Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Carrollton
Gate hinge and post failure in Carrollton usually traces back to one thing: the soil under the footing. Clay soil expands when wet and contracts in summer heat, and over twenty or thirty years it works a shallow post loose at grade. We replace hinges, cut out rusted posts, pour proper footings, and weld reinforcement that holds. If your gate drags, sags, or won’t latch, call us at (936) 259-0479. We serve every neighborhood in Carrollton and quote the full job before any work starts.
Why Ironworks Gate Co. Is Carrollton’s Preferred Gate Parts & Welding Company
We have spent 42 years watching Carrollton gates fail in predictable ways. The Trinity Mills and Josey Lane corridor is full of 1980s steel gates hung on original posts that were set in 24-inch footings. Those footings are now rusted, cracked, or heaved. A gate that closes fine in January and drags in July is almost always a post problem, not a panel problem. Our Gate Parts & Welding crew knows what to look for before unbolting anything.
Carrollton homeowners call us because they want a written answer, not a guess. Every job we complete carries the 90-Day Done Right Promise in writing. A background-checked, uniformed technician does the work. The price is settled before a single bolt is turned. And a live person answers the phone 24/7, so when a gate fails at 7 a.m. on a Monday, you speak to someone who can help, not a voicemail queue.
Our Gate Parts & Welding Services in Carrollton
Hinge Replacement
Hinges take the entire weight of a swing gate every time it opens. In Carrollton, we regularly see hinge barrels worn oval and hinge plates cracked at the weld from years of soil movement twisting the post. We cut out the old hinge, grind the post clean, and weld a new barrel hinge or plate hinge with proper reinforcement. The gate gets remounted square, and we test the full swing arc before we leave.
Post Replacement
A rusted or leaning gate post in Carrollton usually means the footing was too shallow for the soil. We saw this recently off of Hebron Parkway: a homeowner called about a sagging swing gate, and our tech found the steel hinge post had rusted through at the base, not a bent panel. We cut out the old post, poured a new 36-inch post footing, welded a reinforced hinge post with a gusset plate, and remounted the existing FAAC swing gate operator after a full safety photocell test. That is the standard here.
Rail Repair
Older slide gates in Carrollton’s light industrial areas run on worn rack and pinion sets. The gate grinds, jumps a tooth, and the motor overloads trying to keep up. We replace rack sections, realign the pinion, and set the gate back on its rail with proper roller clearance. A rail repair done right prevents a LiftMaster operator from burning itself out trying to push a gate that cannot move cleanly.
Custom Welding
Not every gate needs replacing when it fails. A cracked weld, a bent pickup point, a broken latch receiver, or a rusted bottom rail can often be cut out and welded fresh. We weld in place or in our shop, depending on the job. The result is a repair that keeps your original gate look and your original gate weight, without buying a whole new panel.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Carrollton
We are trained and equipped on nine gate-automation brands, and in Carrollton we see a lot of FAAC swing operators on estate gates, Linear openers on older slide gates, and LiftMaster units on newer installs. Because we carry a range of parts and know which brands are common in Carrollton, most repairs can be completed in one visit. If your opener is a BFT or a Viking, we handle those too. The goal is the same: the correct fix on the first trip, not a parts order that leaves your driveway open for a week.
Common Gate Parts & Welding Problems We See in Carrollton Homes
- Hinge post heaving in clay soil. Carrollton’s clay expands with rain and contracts in August. Shallow footings get worked loose over the years, and the post starts to lean, which drops the gate and cracks the weld at the base.
- Worn rack and pinion on slide gates. Light industrial properties and some older homes have slide gates with rack teeth worn smooth. The gate jumps, the LiftMaster operator overloads, and eventually something trips or burns out.
- Rusted posts at grade. The original steel posts set in the 1980s along the Trinity Mills and Josey Lane corridor were rarely sleeved or sealed. Water sits at the weld line, and the post rusts through right where it meets the concrete.
- DIY roller replacements that skip sag correction. Near the Greenbelt, we see gates where someone swapped rollers but never fixed the underlying sag. The gate drags on the rail, and within a year the operator is burned out. Rollers are a symptom, not always the cause.
Pricing for Gate Parts & Welding in Carrollton, TX
A hinge replacement on a standard residential swing gate in Carrollton typically runs $180 to $420 per hinge, including welding and alignment. A full post replacement, with the old post cut out, a new 36-inch footing poured, a reinforced post welded in, and the gate remounted, usually comes in between $600 and $1,400 depending on access and gate size. Rail repair on a slide gate runs $250 to $750. Custom welding jobs range from $150 for a cracked weld up to $1,000 or more for structural repairs on larger estate gates. Every quote is written, itemized, and agreed before work begins. Call (936) 259-0479 for a free estimate.
We Also Serve Cities Near Carrollton
Our Carrollton crews regularly handle gate work in Addison, Coppell, Richardson, and Irving. The same written pricing, the same 90-Day Done Right Promise, and the same live phone support apply wherever we go. If your gate is old, sagging, or grinding in any of those cities, the fix starts with one call.
Serving Carrollton, TX - Our Local Coverage Area
We’re based in the Carrollton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Carrollton
A turnbuckle is a temporary band-aid, not a repair, and in Carrollton we rarely recommend one as a permanent fix. Summer sag on a swing gate almost always means the hinge post is moving in the clay soil, not that the gate frame is stretched. The post footing is shallow, the clay is contracting, and the post is leaning. A turnbuckle can pull the gate level for a season, but it does nothing for the post. The proper repair is to expose the post, check for rust at grade, and either reinforce or replace the post with a deeper footing. Call (936) 259-0479 and we will tell you which one your gate needs before quoting anything.
Here is the honest sequence. We cut out the old post below grade, dig out the old footing, and pour a new one at least 36 inches deep. The new post gets welded with a gusset plate at the base, set square and plumb, and the concrete cures before we remount the gate. In Carrollton, skipping the cure time or pouring a shallow footing is what created the problem in the first place. A proper post replacement takes a full day or two, not two hours. The gate gets remounted, the hinge alignment is checked, and the operator is tested for full travel and safety reversal before we call it done.
It is usually the rack, not the rollers, especially on older Carrollton slide gates. The rack teeth wear smooth over time, the pinion skips, and the whole gate shudders and grinds as the motor pushes against a mechanical bind. Rollers can contribute if they are flat or seized, but the grinding sound is almost always metal-to-metal contact in the rack and pinion set. We check both: roller condition and rack wear. Replacing a worn rack section typically fixes the grind and stops the operator from overloading. Call (936) 259-0479 and we will diagnose it on site.
A full hinge post replacement in Carrollton typically runs $600 to $1,400, depending on the gate size, access, and whether the old footing needs to be fully excavated. That includes cutting out the old post, pouring a new 36-inch footing, welding in a reinforced post with a gusset plate, remounting the gate, and testing the operator’s safety features. It is more than a hinge swap, and it should be: this is the repair that keeps the gate square for another thirty years. We quote the exact price before any work starts. Estimates are free.
No, and we will tell you why directly. A proper post replacement requires concrete to cure before we hang the gate back on it. Pouring the footing and immediately loading it with gate weight is how shallow, cracked footings happen in the first place. We will come out the same day to assess the gate, secure it if it is unsafe, and get you a written quote. The replacement itself is scheduled so the footing has time to cure. You get a gate that stays square, not a gate that has to be fixed again next summer. Call (936) 259-0479 to schedule an assessment.
If your gate in Carrollton is sagging, grinding, or rusting at the post base, call (936) 259-0479. We will send a uniformed, background-checked technician to look at it, hand you a written quote with the full price before work starts, and stand behind the repair with the 90-Day Done Right Promise. Led by Victor Salinas, our crew treats your gate, and your driveway, the way we would treat our own.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Carrollton and the surrounding area since 1984.