Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Irving
A gate motor or opener repair in Irving generally runs $225-$485 for most swing and slide operator fixes, and a complete motor installation with new arms, safety edges, and wiring typically lands between $1,400 and $3,200 depending on the gate’s weight and the power run involved. We’re Ironworks Gate Co., and we’ve been keeping driveway and estate gates opening cleanly across Irving for years. If your gate is grinding, stalling, or refusing to move at all, call (936) 259-0479 and a live person will answer, day or night.
Why Ironworks Gate Co. Is Irving’s Preferred Gate Motor & Opener Company
Irving homeowners don’t call a gate company because they want a project. They call because a gate that won’t open is a real problem: a car trapped in the driveway, a delivery driver honking on Valley View Lane, or a commercial lot on Story Road backing up at 7 a.m. That’s the call we answer. Our techs know the difference between a struggling single-driveway gate in Las Colinas and a high-cycle apartment gate near North Lake College, and we stock parts for both.
Victor Salinas leads our Irving-area work, and he doesn’t send a crew out until the job is understood. We quote the work before it starts, in writing. No meter running, no discovery charges once the panel is open. Every job we complete in Irving is covered by our 90-Day Done Right Promise: if it isn’t right, we come back and make it right. No arguing, no forms, no chasing us down.
Response time to most Irving neighborhoods is same-day for repairs. We run trucks through the 75038, 75039, 75061, and 75062 zip codes regularly. A live person answers the phone 24/7. Not a voicemail tree. If you call at 10 p.m. from a home off MacArthur Boulevard with a gate stuck halfway, you’ll talk to a person who can actually dispatch help.
Our Gate Motor & Opener Services in Irving
Motor Installation
A proper motor installation in Irving is not a bolt-on job. We check the gate’s weight and balance, set the post or pad correctly for our expansive clay soil, run the power and low-voltage wiring to code, and test the entrapment protection before we call it done. New installations in Irving typically run $1,400-$3,200 for residential gates. We never promise same-day installation; a measured, scheduled job is a job that lasts. Call for a free measure and a written price.
Motor Repair
Most Irving repair calls are diagnosed in the first hour. We replace worn gears, capacitors, limit switches, and control boards on the first visit whenever possible because our trucks carry common parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. A typical repair in Irving falls between $225 and $485. When the motor is beyond saving, we’ll show you the failed part, explain what happened, and quote a replacement before any work continues.
Linear Motor
Linear operators are common on Irving’s commercial and multi-family gates, especially the slide gates you see on apartment complexes along Belt Line Road and the warehouses off State Highway 114. We service and replace Linear motors, controls, and photo eyes. If your Linear operator has started reversing mid-travel or sitting silent after a power blink, the fix is usually straightforward for a tech who works on them weekly. Repair work on a Linear motor in Irving generally runs $250-$500.
Slide Motor
Slide gates eat motors when the footing shifts or the rack gets out of alignment, and Irving’s clay soil makes both happen. We don’t just swap the motor on a slide gate; we check the rail, the wheels, the rack alignment, and the end stops. A slide motor replacement with re-alignment in Irving typically costs $1,200-$2,800, depending on gate length and whether new rack sections are needed. If the motor still runs but the gate drags, a service call may be all you need.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Irving
We’re trained and equipped on nine gate-automation brands, which means the fix is usually right the first time, whatever is on the driveway. Around Irving, we see a lot of LiftMaster swing operators in the residential neighborhoods, FAAC and BFT on the estate gates, and Linear and Viking on commercial slide gates. Because we carry parts for all of them, most Irving repairs are completed in a single visit. No ordering a board and hoping it arrives next week.
Common Gate Motor & Opener Problems We See in Irving Homes
- Plastic gear wear from heat and heavy use. Irving summers push 100°F for weeks straight, and a gate cycling 80-plus times a day wears out the plastic drive gears inside a residential LiftMaster operator fast. Homeowners describe it as a grinding noise that gets worse every week. We replace the gear and check the cycle count before reinstalling.
- Loop detector confusion in commercial lots. Gates on Irving commercial properties with steady truck traffic sometimes close on a vehicle or refuse to reopen. It’s rarely the motor. It’s a loop detector that was never tuned for long-wheelbase trucks. We replace or recalibrate the loop and test it with passenger cars and delivery trucks too.
- Shifting post footings after heavy rain. Irving’s expansive clay swells when it rains and shrinks when it dries. A newer gate set into a shallow footing will drift out of plumb within a season or two, and the rack and pinion starts binding. The gate creaks, then jerks, then refuses to move. The fix is a proper footing, not a bigger motor.
- Battery backup failures on security gates. Gated communities and storage facilities in Irving often have battery backup systems, but nobody tests them until the power actually drops. Then the gate sits dead during an outage. We install and test battery backups that keep the gate cycling through a full outage window. Call for a test if you don’t know the last time yours actually ran on battery.
Pricing for Gate Motor & Opener in Irving, TX
A typical gate motor repair in Irving runs $225-$485. Motor replacement with installation falls between $1,400 and $3,200 for residential swing or slide gates. Commercial slide operators, especially high-cycle units along the SH 114 corridor, start around $2,500 and can run past $5,000 when new rack, loop detectors, and battery backup are included. What moves the number is the gate’s weight, the cycle count, the condition of the existing footing and rack, and the power run distance. Every quote we give in Irving is written, itemized, and agreed to before any work starts. You’ll know the full price before a bolt is turned. Call (936) 259-0479 for an exact quote. Estimates are free.
We Also Serve Cities Near Irving
Our Irving customers sometimes ask if we cover their daughter’s place in Coppell or a shop in Carrollton. We do. We regularly run trucks through Irving and the surrounding cities, including Dallas, Addison, Coppell, and Carrollton. Same crew, same 90-Day Done Right Promise, same live person answering the phone at (936) 259-0479.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Irving
Every six months. A commercial gate in Irving cycling 100 to 200 times a day, especially along the SH 114 commercial corridors or the Urban Center, needs its chain or belt tension checked, limit switches tested, loop detectors verified, and safety edges inspected at least twice a year. Waiting for a failure is more expensive than a $189 tune-up visit. Call (936) 259-0479 to schedule a service check before the gate goes down during a morning rush.
Nine times out of ten it’s either a binding hinge, a dragging wheel, or a shift in the gate’s alignment from Irving’s expansive clay soil. The operator senses resistance, reads it as an obstruction, and reverses to prevent damage. Heat can also soften older plastic gears and make the board misread current draw. The fix is usually mechanical, not electronic. We find and correct the bind, clear the travel path, and test the gate through a full cycle before leaving.
Solar is workable for single-family driveway gates in Irving, but only when the gate cycles fewer than about 15 times a day and the panel gets direct, unobstructed sunlight. Most Irving driveways with daily commuter traffic and shaded lots under mature post oaks or pecan trees are better served with a grid-tied motor and a battery backup for outages. We size solar systems honestly, and if a panel will leave you with a dead gate by Thursday, we’ll say so and quote the reliable option instead.
Yes. UL 325 is a national safety standard, and any operator we install on an Irving gate includes monitored photo eyes, a reversing edge or inherent obstruction sensing, and a pressure test to confirm the gate reverses before it can hurt someone. This is not an upsell. It’s the difference between a gate that stops for a delivery driver and one that doesn’t. Every installation we do in Irving is tested for entrapment protection before we hand it over.
Because the post was set into expansive clay that swelled and shifted when it got wet. Irving’s soil is mostly Houston Black and Trinity clay, and it moves more than people expect after a series of heavy storms. The hinge post tilts, the gate loses plumb, and the operator has to push against gravity on every cycle. The long-term fix is resetting the post deeper, with a properly compacted concrete collar, and rebalancing the gate. Patching the hinge alone won’t hold. Call (936) 259-0479 for a free on-site look, and we’ll tell you exactly what’s moving and what it’ll take to stop it.
Last spring our crew replaced a burnt-out Linear slide motor on a storage facility gate off Story Road. The post footing had shifted and the rack and pinion was binding, which is what killed the motor in the first place. We reinstalled the footing, realigned the rack, and fitted a Viking operator with a loop detector for exit sensing. The gate now cycles 200 times a day without overheating. That’s the standard we bring to every job in Irving: fix the cause, not just the symptom, and back it in writing.
If your gate motor is acting up anywhere in Irving, from Valley Ranch to Las Colinas to the neighborhoods off Rochelle Road, call (936) 259-0479. We’ll answer, we’ll listen, and we’ll give you an honest read on what the job needs and what it costs. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Irving and the surrounding DFW area.